ROME TRCW-20, Operator'S Manual

Page: 43 / 66

43
OPERATING MACHINE
SET DRAWBAR ANGLE
The drawbar can be positioned so disc will trail
directly behind tractor or be offset in one of several
positions. The harrow may be moved laterally
behind tractor by moving drawbar plates on offset
bar. First, remove the bolts through offset bar, slide
plates to right or left, and replace bolts. The
drawbar may be adjusted to give the desired angle
in the front gang. To do this, remove the angle-
selecting bolt, rotate the drawbar to the desired
setting, replace and tighten bolts. Moving the
drawbar to right has the effect of increasing angle
in the front gang, moving it to the left decreases it.
The greater the angle, the more aggressively the
gang will plow. This is desirable in hard ground
conditions or when more penetration is wanted.
Final adjustment should be made after harrow has
been put into operation, observing the proper angle
and trailing of the harrow.