Roland VersaStudio BR-20 Master Manual Download | Manualshive

Page: 89 / 112

background image

Read this section whenever you face a problem

87

Chapter 4 Appendix

Chapter 4 Appendix

Attractive Printing or Cutting is Impossible

Printed results are coarse or contain horizontal stripes

Do the print heads show nozzle clogging?

Carry out a printing test and make sure no nozzle clogging occurs. If nozzle clogging is present, perform head
cleaning.



P.22, "STEP3 : Printing Tests and Normal Cleaning," p.74, "Medium and Powerful Cleaning," p.76, "Manual Head

Cleaning"

Have you carried out "Calibrate Sheet Feeding Amount"?

Large misalignment in the amount of feed of the media may result in printing that seems coarse or contains
horizontal stripes. We recommend performing "Calibrate Sheet Feeding Amount" before daily operations and
when changing the media type.



P.23, "STEP 4: Calibrate Sheet Feeding Amount"

Have you carried out "Bidirectional adjustment"?

We recommend performing "Bidirectional adjustment" before daily operations and when changing the media
type. The optimal adjustment value may vary, depending mainly on the thickness of the media.



P.20, "STEP 2: Bidirectional Adjustment"

Is the temperature of the room too low?

The heater may not warm up sufficiently when the ambient temperature is less than 20°C (68°F). Also, even
when the heater warms up, an adequate effect may not be obtained if the media is thoroughly chilled. Before
printing, allow the media to come to room temperature.

Is the printer installed in a level and stable location?

Never install the machine in a location where it is tilted or where it may wobble or experience vibration. Also
make sure that the print heads are not exposed to moving air.

Is the printer installed in a location out of direct sunlight?

Never install in a location exposed to direct sunlight.

Is the media loaded and set up correctly?

If the media is not loaded and set up correctly, printing may be adversely affected. Make sure the media is
loaded and set up correctly.



P.89, "Media Feed is Not Smooth"

Colors are unstable or uneven

Did you shake the ink cartridges gently before in-stalling them?

Shake new cartridges gently before you install them.
When you use metallic silver ink or white ink, shake the metallic silver ink cartridge gently before daily opera-
tions.



P.40, "Characteristics of Metallic Silver Ink and Important Notes", "BN-20 Roland VersaWorks SPECIAL COLOR INK

GUIDE (Metallic Silver & White)"

«
...
87
88
89
90
91
...
»

Summary of Contents for VersaStudio BR-20

















































































































Reviews:

No comments

Related manuals for VersaStudio BR-20

870 - SuperScript B/W Laser Printer

Brand: NEC Pages: 52

SuperScript 1800

Brand: NEC Pages: 8

Brand: W2P Engineering Pages: 40

ColorPainter M-64S

Brand: Oki Pages: 84

Brand: Oki Pages: 424

Magicard Opera 100

Brand: Ultra electronics Pages: 2

DocuColor 45087638

Brand: Xerox Pages: 28

Brand: OKIDATA Pages: 158

Brand: Epson Pages: 68

Brand: Epson Pages: 4

Brand: Epson Pages: 1

Brand: Epson Pages: 1

Brand: Epson Pages: 87

Brand: Epson Pages: 108

Brand: Epson Pages: 89

Brand: Epson Pages: 151

Brand: Epson Pages: 2

DCP 8040 - B/W Laser - All-in-One

Brand: Brother Pages: 176

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands