manualshive.com logo in svg

Roland VersaStudio BR-20, Master Manual

Share
Download
Roland VersaStudio BR-20 Master Manual Download Page 81

Replacing Comsumable Parts

79

Chapter 3 Maintenance

Chapter 3 Maintenance

Replacing the Felt Wiper

The felt wiper is a component used for cleaning the 
print heads. When the message shown in the figure 
appears on the Utility icon on the computer task tray, 
it is time to replace the wiper with a new one.
To purchase a felt wiper, contact us directly or your 
authorized Roland DG Corp. dealer.

When the warning alarm sounds during replacing the felt wiper

An alarm sounds about 30 minutes after the start of the operation. Perform the operation by following the 
message displayed in the Utility window. 

CAUTION 

Always carefully follow the procedures in accordance with the instruc-

tions.  Otherwise a sudden movement of the machine may cause injury. 

Procedure

Open the Utility window. 

 P.8, "How to Open the Utility Window / Exit the Utility"

In the [Replace Tools] tab, click [Replace Felt 

Wiper].

Procedures for replacing the felt wiper are displayed. 
Carefully read the on-screen instructions and start the 
replacement work.

When the operation is completed, close the front cover.

Replace the felt wiper.

Summary of Contents for VersaStudio BR-20

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands