Roland VersaStudio BR-20, Master Manual

Page: 84 / 112

82
Chapter 3 Maintenance Chapter 3 Maintenance
When Moving the Unit
Procedures from Preparing to Move Through Reinstalling
To move the machine, you must completely drain all ink inside the machine and secure the print heads in
place with packing materials to protect them. Attempting to move the machine without first doing this may
result in damage to internal components due to leaking ink or damage to the heads.
Work differs depending on ink type in use. Refer to a Table shown below.
Ink type Required work Required items
AQUEOUS PIG-
MENT ink
(FPG)
When the machine can be reinstalled and
power can be switched on within one
week after the work.

Pump Ink
None
When it takes one week or more after
the work until the machine can be rein-
stalled and power can be switched on.

Head Wash

One piece of unused cleaning car-
tridge for AQUEOUS PIGMENT ink

Four pieces of dummy cartridges

One piece of Jig for inserting car-
tridges
(Purchase all items separately.)
ECO-SOL MAX
(Solvent ink)
Head Wash

One piece of unused cleaning car-
tridge for solvent ink (Purchase the
cartridge separately.)

Four pieces of dummy cartridges
(Accessories)

One piece of Jig for inserting car-
tridges (Accessories)
* Contact your authorized Roland DG Corp. dealer with regard to items that need to be purchased separately.
Important
Make sure to use a cleaning cartridge corresponding to ink type. Use of wrong cartridge may cause a machine
malfunction.
Procedure

Open the Utility window.

P.8, "How to Open the Utility Window / Exit the Utility"

In the [Option] tab, click [Pump ink] or [Head
Wash].
Select a proper work referring to the Table above.
Carry forward the work by following the instructions
displayed on the screen. Do not switch off power during
operation until the work is completed.