Roland VersaStudio BR-20 Master Manual Download

Page: 66 / 112

Utility : Other Function

Chapter 2 Fully Utilizing the Machine



Select [Dry Time] in [Options].

The appropriate setting time varies according to the
media. Set longer time when you use a medium on
which it takes time to dry ink.

Click [Output].

When the printer starts drying, the remaining dry
time is displayed on the utility.

The setting in the BN-20 driver is disabled.

Although Dry Time can be set in the BN-20 driver, if you make output from R-Works, priority is given to the
setting in R-Works, and the setting in the BN-20 driver is disabled.

When you make output via the BN-20 driver using a general drawing application

Make the following setting in the BN-20 driver first, and then make output from the application.

*You cannot make this setting using the BN-20 driver on a white ink model. Refer to Help of Roland VersaWorks.

Procedure



Click [Devices and Printers] (or [Printers and Faxes]) from the Start menu ( ) of

Windows.



Right-click the "Roland BN-20" icon, and

then click [Printing Preferences].

The BN-20 driver’s Printing Preferences screen opens.

If Dry Time is not displayed,

scroll down.

Summary of Contents for VersaStudio BR-20

















































































































Search results

Summary of Contents for VersaStudio BR-20

Reviews:

Related manuals for VersaStudio BR-20

Brands by name

Popular brands

Roland VersaStudio BR-20, Master Manual

Search results

Summary of Contents for VersaStudio BR-20

Reviews:

Related manuals for VersaStudio BR-20

Brands by name

Popular brands