manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, User Manual

Share
Download
Roland VersaSTUDIO BN-20A User Manual Download Page 104

Handling Messages and Error
Messages

Messages ............................................................................................... 104

[XX ink : Shake the cartridge well] ........................................................ 104
[The Waste cartridge is full.] ............................................................... 104
[Replace the wiper.] .......................................................................... 104
[Replace the felt wiper.]..................................................................... 104
[The connection to the printer has been released.]................................... 104
[Clean the printer manually.]............................................................... 104

Error Messages ........................................................................................ 105

[The pinch roller position is incorrect.] .................................................. 105
[Crop marks could not be printed. Output will be canceled.] ....................... 105
[Crop mark detection could not be started.] / [Crop marks were not found. Out-

put will be canceled.].................................................................. 105

[The operation has been stopped to prevent the print heads from drying out. Turn

the printer off.] ......................................................................... 105

[Motor error] ................................................................................... 105
[Waste cartridge is estimated to be full] ................................................. 106
[Temperature error] .......................................................................... 106
[Cover open error.] ........................................................................... 106
[Sheet setup error] ........................................................................... 106
[Data error]..................................................................................... 106
[Ink has run out.].............................................................................. 106
[Pinch lever was returned.]................................................................. 106
[No sheet is present.] ........................................................................ 107
[Printing  cannot  continue  because  the  end  of  the  sheet  was  detected.  Printing

will be canceled.]....................................................................... 107

[ServiceCall No**] ............................................................................. 107
[Ink Cartridge error : *** ink cartridge ].................................................. 107
[BN-20 Utility is already running.]......................................................... 107
[The cleaning liquid cartridge is empty. Replace the cleaning liquid cartridge with

a new one.] .............................................................................. 107

Handling Messages and Error Messages

103

Summary of Contents for VersaSTUDIO BN-20A

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands