Roland VersaSTUDIO BN-20A, User Manual

Page: 40 / 120

[Cut Times]
The number of times to cut the same location. If it is impossible to cut even if you adjust
the cut force and cut speed, increase the cut times. (Default setting: 1)
Check item Result Setting item Adjustment
Check the shape. The cut shape is distorted. [Cut Speed] Reduce
Peel off the circle.
The square also peels off [Cut Force] Increase
Some uncut areas remain. [Cut Speed] Reduce
Peel off the square.
The blade leaves faint traces on the backing
paper.
[Cut Force]
No change
The blade trace is indistinct. Increase
The blade trace is too deep and cuts into the
backing paper
Reduce
6.
Click [Apply].
Repeat [Test Cut] and adjustment until correctly adjusted.
7.
Click [Close].
Cutting / Printing and Cutting
Optimizing the Output Quality
39