manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, User Manual

Share
Download
Roland VersaSTUDIO BN-20A User Manual Download Page 35

To stop output on the printer side

Procedure

1.

Press and hold down the [POWER] key for one second or more during output.

Output stops. You cannot resume output from the stop point.

2.

Press the [POWER] key to turn the machine on.

This operation does not cancel standby output data on the computer. Follow the steps below to
cancel data that is still on the computer.

 RELATED LINKS 

・

   P. 34 "Canceling Output from the Computer"

Canceling Output from the Computer

Procedure

1.

Open [View devices and printers].

• Windows 10

From the start menu, click [Windows System]>[Control Panel]>[View devices and print-
ers].

• Windows 8.1

a. Click [Desk top].
b. Move the mouse to the lower right corner to display Charm and click [Settings].
c. Click [Control Panel]>[View devices and printers].

2.

Double-click the BN-20 icon.

Stopping Print Output

34

 Basic Operations

Summary of Contents for VersaSTUDIO BN-20A

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands