Roland VersaSTUDIO BN-20A, User Manual

Page: 17 / 120

The following four output methods are available for this machine.
Printing (Only)
Printing by using ink. It is also called "Printing Only" as well to distinguish from "Printing and
Cutting."
Cutting (Only)
Cutting by using cutter such as for cutting seal. It is also called "Cutting Only" as well to distin-
guish from "Printing and Cutting."
Printing and Cutting
Printing method which performs printing followed by cutting. If sending output data which
contains both printing and cutting information to the printer, cutting operation starts after
printing finishes.
Crop Cut
Outputting method using "Crop Marks" to align printing and cutting result. In a case such as "re-
moving the printed media and performing lamination, and then reloading it and performing
cutting," align them using the crop marks and perform cutting.
Important Points During Use
Use the machine periodically
We recommend using the machine at least once a week. If left unused for a long period of time, the
ink may settle, resulting in unstable discharge (and nozzle clogging). Any dry ink will need to be dis-
charged.
Four Different Output Methods
16
Basic Information