Roland V-Bass 04672434, Owner'S Manual

Page: 157 / 184

157
GLOBAL Chapter 8 Parameter Guide
Chapter 8
EQ MAIN (Equalizer Main),
EQ SUB (Equalizer Sub)
NS (Noise Suppressor)
REVERB
GLOBAL
Parameter/
Range
Explanation
SETTING1–10
1–10 This selects the SETTING to be set.
NAME
This sets the name for the SETTING (up to eight characters).
INSERT Insert a space at the cursor location.
DELETE Delete a character. The characters that fol-
low get shifted to the left.
SPACE Input a space at the cursor location.
A0! Switch between uppercase letters, numbers,
and characters.
A<=>a Switch between uppercase letters and low-
ercase letters.
MAIN OUTPUT SELECT
This selects the type of device to be connected.
AMP WITH TWEETER
Use this setting when connecting to a tweet-
er-equipped bass amp.
AMP NO TWEETER
Use this setting when connecting to a bass
amp that has no tweeter. The high-frequen-
cy range is adjusted.
LINE/PHONES Use this setting when using headphones or
connecting directly to a PA system or multi-
track recorder.
Parameter/
Range
Explanation
MAIN EQ (Main Equalizer),
SUB EQ (Sub Equalizer)
A four-band equalizer with high and low ranges is provided.
EQ (MAIN) is applied to the output from MAIN OUT; EQ
(SUB) is applied to the output from SUB OUT.
MAIN EQ SW (Main Equalizer Switch),
SUB EQ SW (Sub Equalizer Switch)
OFF, ON Turns the EQ effect on/off.
TOTAL GAIN
-12–+12dB Adjusts the volume before the equalizer.
LOW GAIN
-12–+12dB Adjusts the low frequency range tone.
HIGH GAIN
-12–+12dB Adjusts the high frequency range tone.
LOW MID FREQ (Low Middle Frequency)
20Hz–10.0kHz Specifies the center of the frequency range that will
be adjusted by the LOW MID GAIN.
LOW MID Q (Low Middle Q)
0.5–16 Adjusts the width of the area affected by the EQ
centered at the LOW MID FREQ.
Higher values will narrow the area.
LOW MID GAIN (Low Middle Gain)
-12–+12dB Adjusts the low-middle frequency range tone.
HIGH MID FREQ (High Middle Frequency)
20Hz–10.0kHz Specifies the center of the frequency range that will be
adjusted by the HIGH MID GAIN.
Parameter/
Range
Explanation
HIGH MID Q (High Middle Q)
0.5–16 Adjusts the width of the area affected by the EQ
centered at the HIGH MID FREQ.
Higher values will narrow the area.
HIGH MID GAIN (High Middle Gain)
-12–+12dB Adjusts the high-middle frequency range tone.
Parameter/
Range
Explanation
NS (Noise Suppressor)
-20–20dB This controls the global threshold level for
the noise suppressor settings in each patch.
This feature is effective when you connect a
different bass or for adjusting for changes in
noise levels in the performance venue. It
does not affect the settings in each individu-
al patch.
To use the settings contained in the
individual patches, set this to 0 dB.
Parameter/
Range
Explanation
REVERB
0–200% This controls the global reverb level for the
reverb settings in each patch. Adjusting this
reverb level is effective for adjusting to the
acoustics of the performance space. It does
not affect the settings in each individual
patch.
To use the settings contained in the
individual patches, set this to 100%.
Parameter/
Range
Explanation
VB-99_e.book 157 ページ ２００８年８月１８日 月曜日 午後１時１０分