manualshive.com logo in svg

Roland V-Bass 04672434, Owner'S Manual, Page: 21 / 184

Share
Download
Roland V-Bass 04672434 Owner'S Manual Download Page 21

 

21

Chapter 1 Outputting Sounds

 

Chapter 1

 

Use this procedure to set the type of device connected to the MAIN 
OUT jacks.

 

fig.01-071

 

1.

 

Press [GLOBAL].

 

The Global screen is displayed.

 

fig.01-072d

 

2.

 

Press PAGE [

] to go to Page 1.

 

3.

 

Press [F4] (SELECT) or turn the F4 knob to set 
the type of device to be connected to the MAIN 
OUT jacks.

 

4.

 

Press [EXIT] to return to the Play screen.

 

The VB-99’s sound characteristics vary greatly depending on how 
the divided pickup is installed. To ensure consistent conditions for 
optimal sound production, be sure to make the settings affecting the 
divided pickup (the GK settings). With these settings appropriately 
made, the VB-99 can then operate under optimal conditions.

 

*

For information on parameters not described in this chapter, refer to 

 

“GK SETTING”

 

 (p. 145).

 

When using more than one bass with the VB-99, you can 
save the settings for each bass separately.

 

fig.01-100

 

1.

 

Press [SYSTEM].

 

The System screen is displayed

 

2.

 

Press PAGE [

] to go to Page 1.

 

3.

 

Press [F3] (GK).

 

The GK Settings screen is displayed.

 

fig.01-060d

 

4.

 

Press PAGE [

] [

] to go to Page 2.

 

Setting the Device (Amp) 
Connected to MAIN OUT (Output 
Select)

 

Value

Explanation

 

AMP WITH TWEETER

Use this setting when connecting to a tweet-
er-equipped bass amp.

AMP NO TWEETER

Use this setting when connecting to a bass 
amp that has no tweeter. The high-frequen-
cy range is adjusted.

LINE/PHONES

Use this setting when using headphones or 
connecting directly to a PA system or multi-
track recorder.

3

3

4

1

2

 

Inputting the Divided Pickup 
Settings (GK Settings)

The GK settings are extremely important to getting 
good tones from the VB-99. Be sure to input the 
settings correctly.

3

4

1

2

5

6

7 9

12

10 11

8

VB-99_e.book 21 ページ ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Reviews:

No comments