manualshive.com logo in svg

Roland V-Bass 04672434, Owner'S Manual, Page: 51 / 184

Share
Download
Roland V-Bass 04672434 Owner'S Manual Download Page 51

 

51

Chapter 5 Using MIDI

 

Chapter 5

 

While the use of MIDI allows various devices to communicate with 
each other, this does not mean that it enables exchanges of all 
information. The data that can be exchanged between any two 
connected devices is limited to the messages common to both 
devices.

Therefore, MIDI device owner’s manuals always contain a MIDI 
Implementation chart, which allows the user to determine quickly 
what MIDI messages the particular device supports. Comparing the 
MIDI Implementation charts for each device allows you to confirm 
what information can be exchanged and how to accomplish this. 
Since these charts are uniform in size, you can overlay the charts for 
the transmitting and receiving devices when checking the 
information.

This section provides a simple description of how MIDI messages 
are exchanged.

 

About MIDI Connectors

 

MIDI messages are exchanged via the connectors described below. 
Connect MIDI cables to these connectors according to the use.

MIDI allows various different messages to be sent separately to 
multiple MIDI devices over a single MIDI cable. This is possible 
thanks to the concept of MIDI channels.

MIDI channels use an approach similar to that of television channels. 
Switching channels on the TV allows the viewer to watch programs 
from a variety of broadcasters. This is because information is 
transferred over the channel to which both the transmitter and 
receiver are tuned.

MIDI includes channels numbered 1–16; MIDI messages are 
transmitted to (receiving) instruments set to the same channel as the 
transmitting device’s.

 

About the MIDI Implementation

Transmit

Function

Fold here

MIDI Device A

MIDI Device B

Recognized

Remarks

A separate publication titled “MIDI Implementation” is also 
available. It provides complete details concerning the way MIDI 
has been implemented on this unit. If you should require this 
publication (such as when you intend to carry out byte-level 
programming), please access the Roland web site.

http://www.roland.com/

 

Exchanging MIDI Messages

 

MIDI 
Connector

Description

 

MIDI IN

Messages from other MIDI devices are received 
here.

MIDI OUT

Messages from the VB-99 are transmitted here.

 

About MIDI Channels

Broadcasting

 Station A

Broadcasting

 Station B

Broadcasting

 Station C

TV information from many different broadcasting 
station is sent through an antenna.

Select the channel of the broadcasting 
station you wish to watch.

VB-99_e.book 51 ページ ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Reviews:

No comments