Roland V-Bass 04672434 Owner'S Manual Download Page 13

Page: 13 / 184

Names of Things and What They Do

15.

BALANCE Knob

Sets the mix balance. (p. 32)

16.

CHAIN Button

Used to make settings for the effect and COSM bass/COSM
amp connection sequence. (p. 31)

17.

CONTROL ASSIGN Button

This sets the functions assigned to pedals and switches. (p. 76)

18.

NAME/KEY/BPM Button

Used to specify patch names (p. 34) and the tempo and key (p.
29) for songs to be played.

19.

V-BASS LEVEL Knob

Adjusts the volume of a patch. (p. 33)

20.

V-LINK Button

This switches the V-LINK function on and off. (p. 90)

21.

DIRECT PATCH Buttons

Use these to directly call up the patches you have assigned to
them. (p. 81)

22.

CONTROL Buttons

You can assign and control a variety of different functions
with these buttons. (p. 77)

23.

EXIT Button

Used to return previous screens and to undo operations.

24.

WRITE Button

Use for storing settings in patches and executing operations.
(p. 34) (p. 82)

25.

PAGE Buttons

This switches the screens displayed in the LCD.

26.

BASS TO MIDI Button

This sets the BASS TO MIDI function (the function that
converts what is played on the bass into MIDI signals). (p. 58)

27.

SYSTEM Button

Used for making settings related to the VB-99’s operating
environment. (p. 35)

28.

GLOBAL Button

This sets the GLOBAL function (which affects the tone of all
patches). (p. 40)

29.

TUNER Button

This turns the tuning function on. (p. 23)

30.

RIBBON CONTROLLER

This allows you to change the tone by sliding your finger
along the ribbon.

You can switch a variety of effects on and off directly with the
three buttons. (p. 73)

•

PITCH Button

Changes the bass’s pitch. (p. 74)

•

FILTER Button

Alters the brightness of the sound. (p. 75)

•

ASSIGNABLE Button

Use this to assign different parameters and functions to
the ribbon controller and change the tone in real time. (p.
77)

31.

GK IN Connector

Connect the GK cable here.

32.

POWER Switch

Switches the power on and off. (p. 19) (p. 25)

33.

OUTPUT LEVEL Knob

This adjusts the volume level for the MAIN OUT jacks and
headphone jack.

When a button is lit, it indicates that the function for
that button is switched on.

The corresponding DIRECT PATCH button (1–5) lights when

a Direct Patch (1–5) is selected.

About the Illumination of Buttons

VB-99_e.book 13 ページ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Search results

Summary of Contents for V-Bass 04672434

Reviews:

Roland V-Bass 04672434, Owner'S Manual, Page: 13 / 184

Search results

Summary of Contents for V-Bass 04672434

Reviews: