manualshive.com logo in svg

Roland V-Bass 04672434, Owner'S Manual, Page: 5 / 184

Share
Download
Roland V-Bass 04672434 Owner'S Manual Download Page 5

 

5

IMPORTANT NOTES

 

561

 

• Use only the specified expression pedal (Roland EV-5, 

BOSS FV-500L/500H with a connection cable (stereo 1/4” 
phone – stereo 1/4” phone); sold separately). By 
connecting any other expression pedals, you risk causing 
malfunction and/or damage to the unit.

 

562

 

• Some connection cables contain resistors. Do not use 

cables that incorporate resistors for connecting to this unit. 
The use of such cables can cause the sound level to be 
extremely low, or impossible to hear. For information on 
cable specifications, contact the manufacturer of the cable.

 

563

 

• Use of the included CD-ROM for rental, lease, or the like 

without the permission of the copyright owner is 
prohibited. Unauthorized copying is also prohibited by 
law.

 

566b

 

• The sensitivity of the D Beam controller will change 

depending on the amount of light in the vicinity of the 
unit. If it does not function as you expect, adjust the sensi-
tivity as appropriate for the brightness of your location.

 

801

 

• Avoid touching or scratching the shiny underside 

(encoded surface) of the disc. Damaged or dirty CD-ROM 
discs may not be read properly. Keep your discs clean 
using a commercially available CD cleaner.

 

Printing Conventions and 
icons in This Manual

 

Text or numerals 

enclosed in square 

brackets [   ]

 

Indicate buttons.

 

[WRITE]

 

       WRITE button

Indicates information that you 
should be aware of when 
using the VB-99. 

Indicates supplementary 
information about an 
operation.

Indicates information about a 
convenient operation.

 

(p.**)

 

Indicates a reference page.

VB-99_e.book 5 ページ ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Reviews:

No comments