manualshive.com logo in svg

Roland V-Bass 04672434, Owner'S Manual, Page: 150 / 184

Share
Download
Roland V-Bass 04672434 Owner'S Manual Download Page 150

 

150

Chapter 8 Parameter Guide                                                                        SYSTEM

 

Parameter/
Range

Explanation

 

PC (Program Change)
PC OUT (Program Change Out)

 

OFF, ON

This setting determines whether or not Pro-
gram Change messages are output when the 
VB-99’s patches are switched.
Program Change messages are output when 
this is set to ON.

 

TX PC MAP (Transmit Program Change Map)

 

This setting determines the sequence of Program Change messages 
output when the VB-99’s patches are changed.

FIX

Regardless of the patch settings, Program 
Change messages predetermined for each 
patch number are output.

PROG

The Program Change messages pro-
grammed in each patch are output.

 

RX PC MAP (Receive Program Change Map)

 

You can select whether to use a fixed or freely set correspondence be-
tween program numbers received and the patches switched to when 
the VB-99’s patches are switched by Program Change messages 
transmitted by an external MIDI device.

FIX

The VB-99 switches to the patches predeter-
mined for the corresponding received Pro-
gram Change messages, regardless of the 
Receive Program Change Map settings.

PROG

The VB-99’s switches to the patches set in 
the Receive Program Change Map.

 

RX PC MAP (Receive Program Change Map)

 

You can edit the correspondence between the Program Change num-
bers received and the patches that are switched to.

[F1] (BANK)

Selects the Bank number.

[F2] [F3] (SEL)/
F2, F3 knob

Selects the Program number.

[F5] (SELECT)/
F5 knob

Selects the patch.
When the combination of the Bank number 
and Program number selected with F1, F2, 
and F3 is received, the VB-99 switches to the 
patch selected with F5.

 

TX CC (

 

Transmit 

 

Control Change)

 

This sets the Control Change numbers output when the VB-99’s ped-
als and external pedals or the FC-300’s pedals and external pedals 
are operated.

[F2] [F3] (SEL)/
F2, F3 knob

Selects the controller.

[F5] (SET OFF)/
F5 knob

When the controller selected with F2 or F3 is 
operated, the Control Change message se-
lected with F5 is transmitted.

 

Parameter/
Range

Explanation

 

BULK DUMP

 

With the VB-99, you can use Exclusive messages to set another VB-
99 to the same settings or to save effect sound settings to MIDI se-
quencers and other such devices.

ALL

All transmittable data (SYSTEM, GK SET-
TING, GLOBAL, PATCH 001–200, FAVOR-
ITE SETTING)

SYSTEM

SYSTEM parameters.

GK SETTING

Settings content for GK SETTING 

GLOBAL

GLOBAL function settings

PATCH

Settings for patch numbers 001–200

FAVORITE SETTING

Settings content in FAVORITE SETTINGS 
01–10 for all effects

VB-99_e.book 150 ページ ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Reviews:

No comments