Roland V-Accordion FR-1x Owner'S Manual Download Page 16 | Manualshive

Page: 16 / 80

background image

Before you start playing

16

r

FR-1x V-Accordion

Installing and removing batteries

The FR-1x has a compartment into which you can
install 8 commercially available AA-type Ni-MH batter-
ies (which are rechargeable). You can therefore play
your instrument without connecting the supplied
adaptor.

1.

Switch off the FR-1x.

2.

Remove the cover from the FR-1x’s battery
compartment by pressing the two tabs and
lifting the cover.

3.

Insert 8 rechargeable AA-type Ni-MH bat-
teries into the compartment (4 on either
side), taking care to orient them in accor-
dance with the “+” and “–” indications.

4.

Close the FR-1x’s battery compartment.

NOTE

Though it is perfectly possible to use rechargeable batter-
ies, be aware that they cannot be recharged simply by leav-
ing them in the FR-1x’s compartment and connecting the
adapter. You will need an external charging unit.

NOTE

When replacing batteries, be sure to insert them correctly
(ensure correct polarity).

NOTE

Remove the batteries whenever the FR-1x is to remain
unused for an extended period of time.

Battery charge indication

If, while using batteries, the “bAt” message appears in
the display, the remaining battery power is low.
Replace the batteries at your earliest convenience.

A flashing “bAt” message means that you need to
replace the batteries right away (or use the supplied
adaptor).

The FR-1x also allows you to check the remaining
battery charge at any time:

1.

Press and hold the [FREE BASS] (BATTERY)
button.

The FR-1x’s display now shows the battery status.

“ooo” means that the charge is still at the maximum
level, “oo” refers to a medium level, and “o” to a low
charge level. If the “o” starts flashing, you need to
replace or recharge the batteries. If the message
“AdP” is displayed, the FR-1x is powered by the sup-
plied adaptor.

NOTE

The battery charge indication is only an approximation.

Battery duration

New or fully charged batteries should last about 8
hours (for 2000mAh Ni-MH batteries) during contin-
uous operation while the internal speakers are off
(see “Speaker Mode” on p. 55), or 5 hours while the
speakers are on.

NOTE

Actual battery life varies according to usage conditions, the
quality of the batteries and the number of charging cycles.

NOTE

While the adaptor is connected to the DC IN socket with-
out being connected to a wall outlet, the FR-1x cannot be
switched on, regardless of whether or not it contains bat-
teries.

Note about rechargeable batteries

Certain batteries can be recharged several times
before they need to be replaced with new ones. Note
that it is normal for the batteries to last increasingly
shorter as time goes by. At the end of their life cycle,
they may only last one hour, for example. But that is
a gradual process.

NOTE

Though it is perfectly possible to use rechargeable batter-
ies, be aware that they cannot be recharged simply by leav-
ing them in the FR-1x’s compartment and connecting the
adapter. You will need an external charging unit.

NOTE

We recommend using rechargeable AA-type Ni-MH batter-
ies.

ooo

FR-1x GB.book Page 16 Tuesday, November 8, 2011 11:44 AM

«
...
14
15
16
17
18
...
»

Summary of Contents for V-Accordion FR-1x

















































































Reviews:

No comments

Related manuals for V-Accordion FR-1x

Brand: Farfisa Pages: 14

Brand: Valmet Pages: 63

Brand: WattNode Pages: 57

Brand: Kanomax Pages: 31

Brand: Hach Pages: 196

Brand: Oldham Pages: 43

Brand: ACECO Pages: 2

Power Xpert PXM 4000

Brand: Eaton Pages: 28

Brand: DAKOTA ULTRASONICS Pages: 38

Brand: PTC Instruments Pages: 2

KS-PH-221-DELUXE

Brand: Kensington Pages: 14

DUAL-BLEND 4114

Brand: NCL Pages: 7

Brand: Bamo Pages: 16

Brand: Ziton Pages: 2

Brand: PKP Pages: 20

Brand: Kedida Pages: 4

Brand: pyroscience Pages: 10

Brand: YOKOGAWA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands