Roland V-Accordion FR-1x Owner'S Manual Download

Page: 20 / 80

Before you start playing

FR-1x V-Accordion

Securing the adapter and/or MIDI
cable

Proceed as follows to ensure that the adapter cable –or
a MIDI cable– doesn’t come loose while you are play-
ing.

Your FR-1x comes with an adapter and an attachment
strip that allows you to secure the adapter cable and
optional MIDI as well as audio cables to the right strap.

Prepare the adapter cable and the attach-
ment strip as follows:

Be sure to attach the strip

before

the ferrite core on

the adapter cable. If you like, you can also add the
MIDI cable and audio cables to this assembly.

Secure the attachment strip as shown in the
illustration, making sure that the ferrite
core cannot slide out of the loop.

Hold the adapter cable close to the right
strap and wind the attachment strip around
it as shown.

The strip is fitted with a Velcro layer that holds it in
place.

Keep winding the attachment strip around
the strap until your assembly looks as fol-
lows:

Reverse these steps to remove and discon-
nect the adapter and/or MIDI and audio
cables when you want to stop playing.

Ferrite core

FR-1x GB.book Page 20 Tuesday, November 8, 2011 11:44 AM

Summary of Contents for V-Accordion FR-1x

















































































Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands

Roland V-Accordion FR-1x, Owner'S Manual

Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands