Roland V-Accordion FR-1x Owner'S Manual Download Page 21 | Manualshive

Page: 21 / 80

background image

Switching the power on and off

V-Accordion

r

21

Switching the power on and off

NOTE

Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/
or damage to speakers and other devices.

NOTE

Always make sure the volume is turned down before switch-
ing on the power. Even with the volume all the way down,
you may still hear some sound when the FR-1x is switched on,
but this is normal and does not indicate a malfunction.

Turning on the power

1.

Turn the [VOLUME] knob all the way
towards the small dot to minimize the vol-
ume.

If you connected the FR-1x to an amplifier, etc., set
its volume to the minimum value as well.

2.

To switch the FR-1x on, press the [POWER]
button.

The [POWER] button lights.

NOTE

This unit is equipped with a protection circuit. A brief inter-
val (a few seconds) after power up is required before the
unit will operate normally.

3.

Turn the [VOLUME] knob clockwise to set
the volume to an appropriate level.

4.

Adjust the volume of the receiving audio
device (if connected).

Turning off the power

1.

Turn the [VOLUME] knob all the way
towards the small dot to minimize the vol-
ume.

If you connected the FR-1x to an amplifier, etc., set
its volume to the minimum value as well.

2.

Press the FR-1x’s [POWER] button (its indi-
cator goes dark).

Using headphones

The FR-1x has one jack for plugging in headphones.
This allows you to play without having to worry about
bothering others around you, even at night.

1.

Plug the headphones into the [PHONES] jack
located on the FR-1x’s connection panel.

NOTE

Use stereo headphones. Please use only Roland head-
phones. Headphones from other manufacturers may be
unable to provide sufficient volume.

NOTE

The FR-1x’s speakers are switched off when you connect
headphones. In that case, the SPEAKER OFF indicator lights.
See also “How to read the display” on p. 22.

2.

Use the FR-1x’s [VOLUME] knob to adjust
the headphone volume.

NOTE

This unit has a function that automatically switches off
the power after a certain amount of time has passed
without any buttons being operated.
You can disable this function. See “Auto Off” on p. 55.

FR-1x GB.book Page 21 Tuesday, November 8, 2011 11:44 AM

«
...
19
20
21
22
23
...
»

Summary of Contents for V-Accordion FR-1x

















































































Reviews:

No comments

Related manuals for V-Accordion FR-1x

Brand: Cannon Pages: 64

Brand: Cannon Pages: 73

Brand: Hach Pages: 38

Brand: Hach Pages: 28

Brand: Hach Pages: 40

POCKET COLORIMETER II

Brand: Hach Pages: 142

Brand: Hach Pages: 4

Brand: Hach Pages: 308

Brand: Hach Pages: 158

Brand: Hach Pages: 118

POCKET COLORIMETER II

Brand: Hach Pages: 116

Brand: Hach Pages: 132

Brand: Hach Pages: 8

Brand: Hach Pages: 38

Brand: Hach Pages: 200

Brand: OBDPROG Pages: 8

Brand: Zeversolar Pages: 35

Brand: Zenner Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands