Roland V-Accordion FR-1x Owner'S Manual Download

Page: 10 / 80

Important notes

FR-1x V-Accordion

Storage devices that can be connected to the
FR-1x’s USB port

• The FR-1x allows you to connect commercially available USB

memories. You can purchase such devices at a computer store, a
digital camera dealer, etc.

• Use USB memory sold by Roland (M-UF series). We cannot guaran-

tee operation if any other USB memory is used.

Before using external USB memories

• When connecting a USB memory, carefully insert it all the way

into the FR-1x’s USB port.

• Do not touch the pins of the FR-1x’s USB port or allow them to

become dirty.

• Never insert or remove a USB memory while this unit’s power is

on. Doing so may corrupt the unit’s data or the data on the USB
memory.

• USB memories are constructed using precision components; han-

dle the storage devices carefully, paying particular note to the fol-
lowing.

• To prevent damage from static electrical charges, discharge any

static electricity that might be present in your body before han-
dling a USB memory.

• Do not touch the terminals with your fingers or any metal

object.

• Do not bend or drop a USB memory, or subject it to strong

impact.

• Do not leave a USB memory in direct sunlight or in locations

such as a closed-up automobile.

• Do not allow a USB memory to become wet.

• Do not disassemble or modify your external USB memory.

• When connecting a USB memory, position it horizontally with the

FR-1x’s USB port and insert it without using excessive force. The
USB port may be damaged if you use excessive force when insert-
ing a USB memory.

• Do not insert anything other than a USB memory (e.g., wire, coins,

other types of device) into the USB port. Doing so will damage the
FR-1x’s USB port.

• Never connect your USB memory to the FR-1x via a USB hub.

Notice

• MPEG Layer-3 audio compression technology is licensed from

Fraunhofer IIS Corporation and THOMSON Multimedia Corpora-
tion.

• Roland and V-Accordion are either registered trademarks or trade-

marks of Roland Corporation in the United States and/or other
countries.

• MMP (Moore Microprocessor Portfolio) refers to a patent portfolio

concerned with microprocessor architecture, which was developed
by Technology Properties Limited (TPL).
Roland has licensed this technology from the TPL Group.

• Company and product names appearing in this document are

trademarks or registered trademarks of their respective owners.

FR-1x GB.book Page 10 Tuesday, November 8, 2011 11:44 AM

Summary of Contents for V-Accordion FR-1x

















































































Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands

Roland V-Accordion FR-1x, Owner'S Manual

Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands