Roland V-Accordion FR-1x Owner'S Manual Download Page 19

Page: 19 / 80

Bass strap

V-Accordion

Close the security clip to ensure that the
strap cannot come loose.

Repeat steps (3)~(5) for the other strap.

The upper strap ends should look as follows:

Slide the lower end of one strap through the
right holder ring as shown.

Slide the strap end through the upper eyelet
of its plastic buckle (see the illustration).

Turn the strap end around and insert it into
the lower eyelet, then pull it tight.

NOTE

You may want to adjust the length first to suit your prefer-
ence.

10.

Slide the plastic clip over the loose and long
lower strap ends to secure the strap.

11.

Repeat steps (7)~(9) for the other lower
strap end.

Bass strap

The FR-1x’s bass strap (used to move the bellows in
and out) is made of fabric and fitted with a Velcro
strip that allows you to adjust its slack.

FR-1x GB.book Page 19 Tuesday, November 8, 2011 11:44 AM

Summary of Contents for V-Accordion FR-1x

















































































Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands

Roland V-Accordion FR-1x, Owner'S Manual

Search results

Summary of Contents for V-Accordion FR-1x

Reviews:

Related manuals for V-Accordion FR-1x

Brands by name

Popular brands