Roland monoFab SRM-20, User Manual

Page: 129 / 152

What to Do If . . .
129
Abnormal Cutting is Performed
Is a Large Amount of Cutting Waste Present?
Clean away any cutting waste . Clean the area around the spindle head
especially carefully .
"
“Cleaning the X-/Z-Shafts” (p . 119)
Is the Location of the Origin Set Correctly?
Check whether the origin has been set correctly . An incorrect origin location
may result in cutting at an unintended position .
"
SRP Player :
“Origin point of the Model / Origin point”
(p . 96)
"
MODELA Player 4 : “Origin point of the Model / Origin point” (p . 54)
"
“STEP 2 : Set the Origin Point”
(p . 89)
Is the Command Set Correct?
Make sure the appropriate command set for the program you're using has
been selected . An incorrect command mode may lead to errors, unintended
operation, or no operation .
"
“Setup Dialog” (p . 15)
"
“STEP 3 : Confirm the Command Set”
(p . 83)
The Origin is Misaligned
Is the Correct Workpiece Coordinate System Selected?
In the NC program, there are six coordinate systems . Depending on which
coordinate system is used, the position of the origin differs . For instance,
if the NC program uses G55, the origins must be set relative to workpiece
coordinate system G55 .
"
SRP Player :
“Origin point of the Model / Origin point”
(p . 96)
"
MODELA Player 4 : “Origin point of the Model / Origin point” (p . 54)
"
“STEP 2 : Set the Origin Point”
(p . 89)
"
Separate volume
“NC Code Reference Manual”
Has the EXOFS Setting been Made?
The EXOFS in the NC code have a function to shift the origin . Set EXOFS to
zero, then redo the settings for the origins . If the origin is still shifted, check
the program .
How to set EXOFS to zero
1.
Select
[Machine Coordinate System]
from the display of the
coordinate system on the VPanel.
2.
Move the tool position to
“X: 0”
,
“Y: 0”
,
“Z: 0.”
3.
Select
[EXOFS]
at the
[Set Origin Point]
.
4.
Click
[X/Y]
and
[Z]
at the
[Set Origin Point]
.