Roland monoFab SRM-20, User Manual

Page: 110 / 152

NC Code Setting
110
Test Cut Dialog in NC Code
For a cutting data file written in NC code, test output is possible on the VPanel to check it for the presence of mistakes (bugs) .
"
“Cut Dialog”
(p . 17)
Test output conditions
•
When the current command set is
“NC code.”
•
When the selected file is
“NC code.”
1
2
3
4
5
6
No. Display Function No. Display Function
File The files whose output you want to test are displayed here .
The code of the file whose output you want to test is displayed
here .
Change
Coordinatesystem
view
Select the coordinate system that is used to display the
coordinates in the VPanel’s main window . Click this button to generate test output one block at a time .
When you click this button, the next block is executed .
Cutting Speed
You can adjust the feed rate of the cutting tool .
"
“Adjusting the Feed Rate and Spindle
Speed During Cutting”
(p . 106)
Setting unit : 10%
Setting range : 10% to 200%
Click this button to pause the test output . When you click this
button while test output is paused, output begins again .
Quit Cutting Click this button during cutting to stop cutting . Click this button to execute output as indicated by the program .
Close Close this dialog .
Click this button to execute test output at the maximum cutting
tool feed rate . All operations other than the cutting tool feed
rate are executed according to the program .