Roland monoFab SRM-20, User Manual

Page: 14 / 152

14
VPanel (Operation Panel)
No. Name Function No. Name Function
7 Move
View
Moves the spindle head to the center and moves the table to
the very front. This position is called
[View position]
.
Use this button when you want to change the cutting tool or
the cutting material.
CAUTION
11 Spindle Speed
Adjusts the spindle speed.
"
"Adjusting Rotation Speed of the
Spindle" (p. 106)
*
The spindle speed cannot be specified from any
application other than VPanel.
X Y / Z
Moves the cutting tool to the XY origin point.
Moves the cutting tool to the Z origin point.
12
Set up
Sets the cutting machine's operating conditions and the
correction values for the axes.
"
"Setup Dialog"
(p. 15)
Stop Stops the cutting tool at that point when it is moving.
Cut
Configures cutting settings.
"
"Cut Dialog"
(p. 17)
8 Set Origin Point
Select the coordinate system for setting the origin point.
"
"STEP 2 : Set the Origin Point"
(p. 89)
Pause
Pauses and resumes cutting.
"
"Pausing / Resuming"
(p. 104)
9 X/Y / Z
Sets the current XY position to the base point.
Sets the current Z position to the base point.
Cancel
Cancels cutting.
10 Adjust
The feeding speed of a cutting tool is adjusted.
"
"Adjusting Cutting Speed (Override)" (p. 106)
Under no circumstances move the spindle
unit or table with your hands.
Doing so may cause a breakdown.