Roland MC-808, Owner'S Manual, Page: 91 / 156

91
Editing patches (Patch Edit)
Patch/Sample mode
Patch/rhythm set settings that you edit will be lost if you re-select the patch/rhythm set or turn off the power.
If you want to keep your edits, you must use the following procedure to save the data.
All of the MC-808’s patches are rewritable.
In other words, when you save a patch, the patch data that previously occupied the save destination will be overwritten and lost. However,
you can restore the factory-set internal data by carrying out a Factory Reset (p. 25).
1.
In Patch/Sample mode, select the patch that you want to
save.
fig.04-024.e
2.
Press [WRITE].
The patch name entry screen will appear.
fig.04-020
3.
Assign a name to the patch.
Range: space, A–Z, a–z, 0–9, ! “ # $ % & ‘ ( ) * + , - . / : ; < = >
? @ [ ¥ ] ^ _ ` { | }
→ ←
4.
When you have finished entering the name, press [ENTER].
A screen in which you can select the write-destination patch
will appear.
fig.04-021
* To cancel, press [EXIT].
5.
Press [USER] or [CARD] to select the group into which you
want to write the patch.
[USER] User group (Usr)
The patch will be saved in internal memory.
[CARD] Card group (Crd)
The patch will be saved on the card.
* You can’t use the Card group unless a separately sold CompactFlash
card is inserted.
6.
Turn the VALUE dial or use [INC] [DEC] to select the write-
destination patch.
The number and name in the display will change.
Range: UsrA001–H128
CrdA001–H128
7.
Press [ENTER].
You’ll be asked to confirm your choice.
8.
To write the data, press [ENTER].
* To cancel, press [EXIT].
The samples used by the patch will also be saved automatically.
Saving a patch
Button Description
[CURSOR ]
Moves the cursor (the location at
which to enter/edit a character).
Hold down [SHIFT]
and press [INC] or
[DEC] Switches letters between uppercase
and lowercase.
Hold down [SHIFT]
and press [UNDO/
ERASE] Inserts a space at the cursor location.
VALUE dial,
[INC] [DEC] Selects characters.
[UNDO/ERASE] Deletes the character at the cursor lo-
cation, while shifting the following
characters to the left, closing the gap.
This will appear when you edit the patch.
If the destination indicates “Data
Protected!” when you attempt to save
If the bank in which you’re attempting to save the patch is
protected, the following screen will appear and you won’t be
able to save the patch.
fig.04-030
Either save the patch in a bank that’s not protected, or turn off
the Protect setting (p. 126).
* With the factory settings, only “UsrH” (Patch) and “UsrB”
(Rhythm set) is unprotected.
MC-808_r_e.book 91 ページ ２００７年７月１７日 火曜日 午後５時１分