Roland MC-808, Owner'S Manual, Page: 68 / 156

68
Creating an original pattern
About the Timing Scale
Each time you press [SCALE MEASURE], the scale will change in
the following order, letting you select the type of note values to be
entered.
16th notes
fig.03-086.e_70
32nd notes
fig.03-087_70
8th note triplets
fig.03-088_70
16th note triplets
fig.03-089_70
This method lets you enter note messages one at a time.
* You can’t use this method to record data other than note messages,
such as control changes from the motorized faders.
1.
Select Step Recording (Step Rec) as described in
“Selecting a recording method” (p. 65).
fig.03-090
2.
Press [ENTER].
You’ll be in step recording standby mode.
3.
Set the recording parameters before you begin recording.
Use [CURSOR ] to select a parameter, and turn the
VALUE dial or use [INC] [DEC] to set the value.
4.
Select the part that you want to record (p. 65).
5.
Press [PLAY] to begin recording.
Now you can record.
6.
Specify the note message that you want to enter.
Use [CURSOR ] to move the cursor, and use the VALUE
dial or [INC] [DEC] to specify the value.
fig.03-091.e
one measure
Keyboard pads [1]–[16] will correspond to a recording input
region of one measure, and you will be able to input notes at
16th note intervals.
one beat one beat one beat one beat
Keyboard pads [1]–[16] will correspond to a recording input
region of two beats, and you will be able to input notes at
32nd note intervals.
one beat one beat
one beat one beat one beat one beat
one measure
Keyboard pads [1]–[12] will correspond to a recording input
region of one measure, and you will be able to input notes at
8th note triplet intervals.
one beat one beat
Keyboard pads [1]–[12] will correspond to a recording input
region of two beats, and you will be able to input notes at
16th note triplet intervals.
Consecutively recording notes
one at a time (Step Recording)
Recording procedure
Parameter Range Description
Rec Beat 2/4–7/4,
5/8–7/8,
9/8, 12/8,
9/16, 11/16,
13/16,
15/16,
17/16,
19/16 Pattern time signature
* Can be specified only for an
empty pattern.
Rec Measure
Length 1–998 Pattern length
* An already-recorded pat-
tern can be made longer, but
not shorter. To shorten it,
use the pattern edit Delete
Measure (p. 72) to delete
one or more measures.
Rec Velocity 1–127 Volume (velocity) of the
notes that you input from
the keyboard pads.
Location of the note to enter
(measure - beat - tick)
Note Type
Velocity
Gate Time
MC-808_r_e.book 68 ページ ２００７年７月１７日 火曜日 午後５時１分