Roland MC-808, Owner'S Manual, Page: 64 / 156

64
Applying effects
Reverb is an effect that creates the reverberation that occurs when
sounds are played in a hall. You can choose from four types of
reverberation as appropriate for your situation.
Selecting the reverb type
fig.03-074
1.
Hold down [SHIFT] and press [REVERB].
A screen will appear in which you can select the reverb type.
fig.03-075
2.
Turn the VALUE dial or use [INC] [DEC] to select the desired
reverb type.
3.
Press [EXIT] to return to the previous screen.
By using the dedicated editor that’s included you can make
more detailed settings (p. 137).
This is a stereo compressor (limiter) that is applied to the final
output of the MC-808. It processes the high, mid, and low-range
frequency bands independently, compressing the sounds that exceed
a specified volume level, and preventing the sound from distorting.
Selecting the mastering setting
fig.03-075
1.
Hold down [SHIFT] and press [MASTERING].
A screen will appear in which you can select the mastering
settings.
fig.03-077
2.
Turn the VALUE dial or use [INC] [DEC] to select the
mastering settings.
3.
Press [EXIT] to return to the previous screen.
By using the dedicated editor that’s included you can make
more detailed settings (p. 137).
Reverb
Range Description
00: OFF Reverb not used
01: Reverb Basic reverb
02: SRV Room A more detailed simulation of room
reverberation
03: SRV Hall A more detailed simulation of hall
reverberation
04: SRV Plate A simulation of a plate echo (a reverb
device using a metal plate)
3
2
1
Mastering effect
Range Description
Techno Recall settings suitable for the corre-
sponding style.
Hip Hop
Break Beats
User
Recalls the user settings that you saved.
You can use the dedicated editor that’s
included to modify the User settings (p.
137). After modifying them, press
[WRITE] to save them.
You can save only one set of User set-
tings.
3
2
1
MC-808_r_e.book 64 ページ ２００７年７月１７日 火曜日 午後５時１分