Roland MC-808, Owner'S Manual, Page: 79 / 156

79
Editing patterns (Pattern Edit)
Pattern mode
The Microscope lets you edit individual items (events) of recorded performance data; for example you can move an individual
event’s location, make precise changes to it, or delete or insert a single note.
In the PATTERN mode, hold down [SHIFT] and press [REC] to switch to the Microscope screen. The events in the current part of the
currently selected pattern will be displayed together with the current location (measure–beat–tick).
* You must stop the pattern before you can use Microscope editing.
The Microscope lets you view and edit the following 9 types of music data (event).
System Exclusive, Tempo Change, and Mute Control data is contained in the Tempo/Mute part (p. 69).
To view the contents of the Tempo/Mute part, press [TEMPO/MUTE CONTROL].
Editing a pattern in detail (Microscope)
Events you can edit using the Microscope
Event Range Description
Note Note C- –G9 Note data for playing sounds. The note name will be displayed
in brackets.
Velo
(Velocity) 1–127
Gate
(Gate Time) 1–
Program Change (Program Num-
ber) 1–128 Messages that switch sounds (patches)
The program number (PC#) selects the sound.
Control Change CC#
(Control Number) 0–127 Messages that can apply effects such as modulation or porta-
mento, depending on the controller number of the message
The controller number (CC#) selects the function, and Value
specifies the depth of the effect (function). Value 0–127
Pitch Bend -8192–8191
Messages that change the pitch while you play
Poly Aftertouch
(Polyphonic Aftertouch) Note C- –G9 Messages that apply aftertouch to individual keys. The note
name will be displayed in brackets.
* Polyphonic aftertouch is data transmitted independently from
each key to indicate the force with which each key is being pressed
down after it is played. Since the MC-808 is not able to transmit
polyphonic aftertouch, these events cannot be recorded from the
MC-808’s keyboard.
Value 0–127
Channel Aftertouch 0–127 Messages that apply aftertouch to each MIDI channel
* Channel aftertouch is data transmitted for each channel to
indicate the force with which the keys are being pressed down
after notes are played.
System Exclusive MIDI messages specific to the MC-808. If the entire message
cannot be shown on one line, a “ ” will appear at the right
edge of the display.
You can use [CURSOR ] to scroll the display screen.
Tempo Change 5.0–300.0 Messages that change the tempo
Mute Control OFF, ON Mute data for each part
MC-808_r_e.book 79 ページ ２００７年７月１７日 火曜日 午後５時１分