Roland MC-808, Owner'S Manual, Page: 72 / 156

72
Editing patterns (Pattern Edit)
This operation deletes unwanted measures from a pattern, and joins
the remaining measures together.
If a part contains data following the deleted region, the performance
data of that part will be shortened by the corresponding length. If
you specify all parts as the object of the delete operation, the pattern
itself will be shortened.
fig.Delete
This operation inserts blank measures between the specified
measure of a pattern and the following measure. If you want to add
more playing in the middle of a existing performance, use this
operation to insert one or more blank measures, and then record the
additional performance. The inserted measures will have the same
time signature as the time signature preceding the insert location.
fig.Insert
Deleting unwanted measures (DELETE)
Parameter Range Description
Source From Setup,
1–998,
End first measure of the region to be
deleted
* If you set this to “SETUP,” the
setup parameters (p. 43) will be
included.
Source End Setup,
1–998 last measure of the region to be
deleted
* If you set this to “SETUP,” only
the setup parameters will be
selected, and no measures will be
included.
1 2 3 4 5 6
1 2 3 4 5
Inserting blank measures (INSERT)
Parameter Range Description
Source From Setup,
1–997,
End first measure of the region to
insert
* If you set this to “SETUP,” the
setup parameters (p. 43) will be
included.
* If you set this to “END,” the
blank measures will be added to
the end of the data.
Insert Meas 1–998 (Max) Number of measures to insert
* You cannot specify a number
that would cause the pattern to
exceed 998 measures.
1 2 2 3 4 5 6
1 2
2
3 4 5
MC-808_r_e.book 72 ページ ２００７年７月１７日 火曜日 午後５時１分