Roland MC-808, Owner'S Manual, Page: 77 / 156

77
Editing patterns (Pattern Edit)
Pattern mode
This operation extracts data of a specific note number from the
specified part, and moves it to a different part. You can use this to
divide a rhythm set into separate parts for each instrument.
* If the move-source part does not contain any data of the note number
specified by Extract Note, a message of “Cannot Extract!” will appear.
* If the move-destination part contains no performance data, the setup
parameters (p. 43) of the move-source part will be copied.
* If the move-destination part does contain performance data, only the
note data will be moved. This means that the note data will be played
using the sound of the patch selected for the move-destination part.
Here you can make settings for each part within the pattern.
You can also use the faders to set the level and pan of each part
(p. 46).
Moving data of a specific note number
to another part (EXTRACT RHY)
Parameter Range Description
Source From Setup,
1–998,
End first measure of the region to
move data
* If you set this to “SETUP,” the
setup parameters (p. 43) will be
included.
Source End Setup,
1–998 last measure of the region to
move data
If you set this to “SETUP,” only
the setup parameters will be se-
lected, and no measures will be
included.
Src Part 1–16 Move-source part
Src Note 0 (C-)–127
(G9) Note number to be moved
Dest Part 1–16
Move-destination part
Setting the part parameters
(PART PARAM)
Parameter Range Description
Level
(Part Level) 0–127 Volume of the part
Pan
(Part Pan) L64–0–63R Left/right position of the
part
Key Shift
(Part Key
Shift) -48–+48 Transposition of the part
The pitch will change in
semitone steps over a
range of +/-4 octaves.
Rev Send
(Part Reverb
Send Level) 0–127 Reverb level of the part
When the value is “0,”
the original pitch of the
patch itself will be used
without change.
Output Assign
(Part Output
Assign) DRY,
MFX1,
MFX2,
COMP,
DIR,
RHY How the original sound of
each part will be output
DRY: Output to MIX OUT-
PUT jacks without passing
through effects
MFX1 (2): Output through
multi-effects 1 (or 2)
COMP: Output through
the compressor
DIR: Output to DIRECT
OUTPUT jacks without
passing through effects
RHY: Output according to
the settings of the rhythm
set assigned to the part
* “RHY” can be set only
when a rhythm set is as-
signed to the part.
Seq Out
(Sequencer
Output As-
sign) INT,
EXT,
BOTH Output destination from
the sequencer
INT: Internal sound gener-
ator
EXT: MIDI OUT connector
BOTH: Both of the above
simultaneously
MC-808_r_e.book 77 ページ ２００７年７月１７日 火曜日 午後５時１分