Roland Jupiter-80 Owner'S Manual Download

Page: 77 / 108

Using the USB Memory Song Player/Recorder

oduc

tion

Pla

ying S

ounds

Editing S

ounds

ther C

venien

Func
tions

Connec

ting O

ther

Equipmen

ppendix

Basic Operations in the Audio Rec Standby Screen

When you press the [REC] button, the Audio Rec Standby screen will appear.
Here you can make settings for recording.

RENAME

Renames the file in which

the recording will be saved.

Start

Recording will begin.

Recording Mode

Recording

Mode

Explanation

MIX

Sound from the keyboard,

the USB COMPUTER port,

the AUDIO IN jack, and

the playback from the USB

memory song player will

be recorded.

KEYBOARD

Sound from the keyboard

will be recorded.

Count In

Turn this on if you want a two-measure count

before recording (the button will light).

Metronome Beat

Specifies the time signature

of the click sound.

Click

Switches on/off the click

sound during recording.

Player Sync

If this is on, audio file playback will begin at

the same moment that recording begins.

Recording Level Knob/

Level Meter

Use the Recording

Level knob to adjust the

recording level so that the

CLIP indicator of the level

meter does not light.

SELECT

Changes the folder in which

the recording will be saved.

Recording Folder/Recording File

Indicates the name of the folder and file

in which the recorded result will be saved.

Recording

Your keyboard performance can be recorded to a USB flash drive.
The audio being input via the JUPITER-80’s AUDIO IN jack and USB

COMPUTER connector can also be recorded.

MEMO

Sounds for which the Output Assign MAIN OUT check box

is selected (p. 86) will be recorded (except for the metronome

sound).

NOTE

While the Audio Rec Standby screen is displayed, you must not

turn off the JUPITER-80’s power, or disconnect or connect your

USB flash drive.
Also, you must not turn off the JUPITER-80’s power or disconnect

or connect the USB flash drive while recording.
If you do so, the data might not be written correctly, or the

contents of memory might be destroyed.

Press the [REC] button .

The Audio Rec Standby screen will appear.

Make the recording settings, and then touch <Start> .

The [REC] button and [PLAY] button will light, and recording will

begin.

MEMO

• One minute of recorded data will occupy approximately 10 MB.
• To see how much free space remains on the USB flash drive,

refer to “INFORMATION” (p. 87).

To stop recording, press the [ ] (STOP) button .

Recording will stop, and the recorded result will be saved on the

USB flash drive.

Audio files that will be saved

WAV
Sampling Frequency

44.1 kHz

Bit Rate

16-bit

Summary of Contents for Jupiter-80













































































































Search results

Summary of Contents for Jupiter-80

Reviews:

Related manuals for Jupiter-80

Brands by name

Popular brands

Roland Jupiter-80, Owner'S Manual

Search results

Summary of Contents for Jupiter-80

Reviews:

Related manuals for Jupiter-80

Brands by name

Popular brands