Roland Jupiter-80, Owner'S Manual

Page: 47 / 108

47
In
tr
oduc
tion
Pla
ying S
ounds
Editing S
ounds
O
ther C
on
venien
t
Func
tions
Connec
ting O
ther
Equipmen
t
A
ppendix
Moving Your Hand to Modify the
Pitch or Volume (D Beam Controller)
You use the D Beam controller simply by moving your hand above
it. By assigning different functions to it, you can control the sound
in various ways.
MEMO
D Beam controller settings are saved in the Registration.
1.
Press the D BEAM [PITCH], [VOLUME], or [ASSIGNABLE]
button to turn the D Beam controller on .
Button Explanation
[PITCH] button
The pitch will change as you move your hand
above the D Beam controller.
[VOLUME] button
The volume will change, allowing you to add
expression to your performance.
[ASSIGNABLE] button
The function assigned to the D Beam
controller will be controlled.
MEMO
You can assign a performance-related function to the
[ASSIGNABLE] button. The function assigned to the
[ASSIGNABLE] button is specified by the Registration Common/
Control parameter D Beam (p. 31).
2.
While playing the keyboard to produce sound, position
your hand above the D Beam controller and slowly move
it up and down .
3.
To turn off the D Beam controller, once again press the
button you pressed in step 1 (the button will go out) .
Effective range of the D Beam controller
This illustration shows the effective range of the
D Beam controller. No effect will be obtained
if you position your hand outside the effective
range.
NOTE
The effective range of the D Beam controller
will change depending on the lighting
conditions. If the D Beam controller does not
work as you expect, readjust the sensitivity.
For details on readjust the sensitivity, refer to “D Beam Sens” (p.
84).
Changing the Pitch/Applying Vibrato
(Pitch Bend/Modulation Lever)
While playing the keyboard, move the lever toward the left to lower
the pitch, or toward the right to raise the pitch. This is called “pitch
bend.”
Moving the lever away from yourself will apply vibrato.
This is called “modulation.”
Moving the lever away from yourself while also moving it to left or
right will apply both effects simultaneously.
MEMO
For some sounds, the modulation lever will produce a dynamics
effect.
Using the Buttons and Knobs to Modify the
Sound ([S1] [S2] buttons / [E1]–[E4] knobs)
Performance-related functions are assigned to the [S1] [S2] buttons
and [E1]–[E4] knobs. While you perform, you can operate the [S1]
[S2] buttons or [E1]–[E4] knobs to modify the sound in real time.
Turning the [S1] [S2] buttons on/off will turn on/off or switch the
assigned function.
MEMO
You can assign performance-related functions to the [S1] [S2]
buttons. The [S1] [S2] button assignments are specified by the
Registration Common/Control parameters S1-S2 (p. 31).
If the [E1]–[E4] knobs are shown in the Lower Part of the display,
operating these knobs will control the functions assigned to them.
Controlling the Performance