Roland Jupiter-80 Owner'S Manual Download Page 54

Page: 54 / 108

Editing a Registration

If the following display appears when you save

If Live Set parameters or SuperNATURAL Synth Tone parameters

have been edited, the corresponding Live Set or SuperNATURAL

Synth Tone will be highlighted when you save the Registration.

The Live Set has been

edited.

The Synth Tone has

been edited.

You have the option of saving the edited Live Sets and

SuperNATURAL Synth Tones at the same time that you save the

Registration.
If you want to do this, proceed as follows.

Select the Write check box for the Live Sets and

SuperNATURAL Synth Tones that you want to save .

MEMO

If you save without selecting these check boxes, only the

Registration will be saved. The Live Sets or SuperNATURAL Synth

Tones you’ve edited will remain in their edited state without

being saved.

If you want to specify a Live Set number or SuperNATURAL Synth

Tone number at which to save the data, proceed to step 2. If you

want to save the data by overwriting the current Live Set number

and SuperNATURAL Synth Tone number, proceed to step 4.

If you want to specify the Live Set number or

SuperNATURAL Synth Tone number for saving, touch

<SELECT DEST> .

Live Set Select Destination screen will appear.

Select the write destination .

Select the write destina-

tion for the Live Set.

Select the write destina-

tion for the SuperNATURAL

Synth Tone.

Confirm selections and

return to the previous screen.

Touch <WRITE> .

MEMO

• If you specify the same write destination for the Live Sets of the

Upper Part and Lower Part, the message “Cannot Write!” will

appear. Select different write destinations in step 3.

• If you specify the same write destination for the SuperNATURAL

Synth Tones of layers 1–4, the message “Cannot Write!” will

appear. Select different write destinations in step 3.

• If the same Live Set is assigned to the Upper Part and the Lower

Part, and you edit only one Part and then execute this operation,

the edited Live Set will be assigned to the other Part as well.

• If the same SuperNATURAL Synth Tone is assigned to layers 1–4,

and you edit only the SuperNATURAL Synth Tone of a specific

layer and then execute this operation, the edited SuperNATURAL

Synth Tone will also be assigned to the other layers.

Summary of Contents for Jupiter-80













































































































Search results

Summary of Contents for Jupiter-80

Reviews:

Related manuals for Jupiter-80

Brands by name

Popular brands

Roland Jupiter-80, Owner'S Manual

Search results

Summary of Contents for Jupiter-80

Reviews:

Related manuals for Jupiter-80

Brands by name

Popular brands