manualshive.com logo in svg

Roland Fantom-X6, Owner'S Manual

The Roland Fantom-X6 is a cutting-edge music workstation that offers unparalleled creative possibilities. Now, accessing its comprehensive Service Notes manual is easier than ever! Simply visit our website and DOWNLOAD this resource for FREE. Unlock the full potential of the Fantom-X6 by equipping yourself with essential technical knowledge. manualshive.com.

Share
Download
background image

 

304

MIDI Implementation

 

❍

 

Data set 1

DT1

 

Status

Data byte

Status

F0H

41H, dev, 00H, 6BH, 12H, aaH, bbH, 

F7H

ccH, ddH, eeH, ... ffH, sum

Byte

Explanation

F0H

Exclusive status

41H

ID number (Roland)

dev

Device ID (dev: 00H - 1FH, 7FH)

00H

Model ID #1 (Fantom-X6/X7/X8)

6BH

Model ID #2 (Fantom-X6/X7/X8)

12H

Command ID (DT1)

aaH

Address MSB:  upper byte of the starting address of the data to be

sent

bbH

Address: 

upper middle byte of the starting address of the data
to be sent

ccH

Address: 

lower middle byte of the starting address of the data
to be sent

ddH

Address LSB:  lower byte of the starting address of the data to be

sent.

eeH

Data: 

the actual data to be sent. Multiple bytes of data are
transmitted in order starting from the address.

 

:

 

:

ffH

Data

sum

Checksum

F7H

EOX (End Of Exclusive)

*

The amount of data that can be transmitted at one time depends on the type of data, and
data will be transmitted from the specified starting address and size. Refer to the address
and size given in 

 

Parameter Address Map

 

 (P.311).

*

Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each
packet will be sent at an interval of about 20 ms.

*

Regarding the checksum, please refer to P.329.

*

Not received when the Receive Exclusive parameter (SYSTEM/MIDI) is OFF.

Status

Data byte

Status

F0H

41H, dev, 42H, 12H, aaH, bbH, ccH, 

F7H

ddH, ... eeH, sum

Byte

Explanation

F0H

Exclusive status

41H

ID number (Roland)

dev

Device ID (dev: 10H - 1FH, 7FH)

42H

Model ID (GS)

12H

Command ID (DT1)

aaH

Address MSB: upper byte of the starting address of the transmitted

data

bbH

Address:

middle byte of the starting address of the transmitted
data

ccH

Address LSB:

lower byte of the starting address of the transmitted
data

ddH

Data:

the actual data to be transmitted. Multiple bytes of
data are transmitted starting from the address.

 

:

 

:

eeH

Data

sum

Checksum

F7H

EOX (End Of Exclusive)

*

The amount of data that can be transmitted at one time depends on the type of data, and
data will be transmitted from the specified starting address and size. Refer to the address
and size given in 

 

Parameter Address Map

 

 (P.311).

*

Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each
packet will be sent at an interval of about 20 ms.

*

Regarding the checksum, please refer to P.329.

*

Not received when the Receive Exclusive parameter (SYSTEM/MIDI) is OFF.

 

2. Data Transmission

 

■

 

Channel Voice Messages

 

●

 

Note off

 

Status

2nd byte

3rd byte

8nH

kkH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

kk = note number:

00H - 7FH (0 - 127)

vv = note off velocity:

00H - 7FH (0 - 127)

 

●

 

Note on

 

Status

2nd byte

3rd byte

9nH

kkH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

kk = note number:

00H - 7FH (0 - 127)

vv = note on velocity:

01H - 7FH (1 - 127)

 

●

 

Polyphonic Key Pressure

 

Status

2nd byte

3rd byte

AnH

kkH

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

kk = note number:

00H - 7FH (0 - 127)

vv = Polyphonic Key Pressure:

00H - 7FH (0 - 127) 

 

●

 

Control Change

 

*

By selecting a controller number that corresponds to the setting of parameters of
controllers (REALTIME CONTROL knob, and so on), the Fantom-X can transmit any
control change message.

 

❍

 

Bank Select (Controller number 0, 32)

 

Status

2nd byte

3rd byte

BnH

00H

mmH

BnH

20H

llH

n = MIDI channel number:

0H - FH (ch.1 - 16)

mm, ll = Bank number:

00 00H - 7F 7FH (bank.1 - bank.16384)

*

These messages are transmitted when Patch, Rhythm Set or Performance is selected. But
not transmitted when Transmit Program Change or Transmit Bank Select parameter
(SYSTEM/MIDI) is OFF.

*

In Performance mode, these messages are not transmitted when External Bank Select
MSB or External PC Number parameter (PERFORMANCE/PART) is OFF.

*

Although with the Fantom-X you can select the Bank Select messages to be transmitted,
be sure to refer to the Program Change Map on P.330 for the Bank Select messages
transmitted when the Fantom-X is select a Patch, Rhythm Set or Performance.

*

The Bank Select Numbers corresponding to SRX series should be referred to the SRX
series owner’s manual.

 

❍

 

Modulation (Controller number 1)

 

Status

2nd byte

3rd byte

BnH

01H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Modulation depth:

00H - 7FH (0 - 127)

 

❍

 

Breath type (Controller number 2)

 

Status

2nd byte

3rd byte

BnH

02H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Control value:

00H - 7FH (0 - 127)

 

❍

 

Portamento Time (Controller number 5)

 

Status

2nd byte

3rd byte

BnH

05H

vvH

n = MIDI channel number:

0H - FH (ch.1 - 16)

vv = Portamento Time:

00H - 7FH (0 - 127)

 

❍

 

Data Entry (Controller number 6, 38)

 

Status

2nd byte

3rd byte

BnH

06H

mmH

BnH

26H

llH

n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB

Fantom-X678_r_e.book 304 ページ ２００５年５月１２日　木曜日　午後４時４０分

Summary of Contents for Fantom-X6





























































































































































































































































































































































Reviews:

No comments

Related manuals for Fantom-X6

P.I. Engineering X-keys Pro Product Manual preview
X-keys Pro
Brand: P.I. Engineering Pages: 9
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
XtendLan KEYBPTZ3DPJ-LAN User Manual preview
KEYBPTZ3DPJ-LAN
Brand: XtendLan Pages: 34
Technics SX-KN470 Owner'S Manual preview
SX-KN470
Brand: Technics Pages: 76
Ectaco Language Teacher EAl600T User Manual preview
Language Teacher EAl600T
Brand: Ectaco Pages: 52
Genius LuxeMate 810 Media Cruiser Quick Manual preview
LuxeMate 810 Media Cruiser
Brand: Genius Pages: 5
Roccat VULCAN TKL Quick Installation Manual preview
VULCAN TKL
Brand: Roccat Pages: 12
Abee VT-100L User Manual preview
VT-100L
Brand: Abee Pages: 6
Tt eSPORTS NEPTUNE Elite RGB Software User'S Manual preview
NEPTUNE Elite RGB
Brand: Tt eSPORTS Pages: 23
red kiwi S-Line Lady User Manual preview
S-Line Lady
Brand: red kiwi Pages: 16
Kettler FB601 Operating Insructions preview
FB601
Brand: Kettler Pages: 11
Dometic MagicWatch MWE7006 Programming Instructions Manual preview
MagicWatch MWE7006
Brand: Dometic Pages: 240
Fbt EcoBoard K Cleaning Instruction preview
EcoBoard K
Brand: Fbt Pages: 4
perixx PERIBOARD-208 User Manual preview
PERIBOARD-208
Brand: perixx Pages: 22
MetaSystem Meta Voice Installation Manual preview
Meta Voice
Brand: MetaSystem Pages: 44
Genie CCTV KB5451 User Manual preview
KB5451
Brand: Genie CCTV Pages: 8
nedis GKBD400BKND User Manual preview
GKBD400BKND
Brand: nedis Pages: 4
nedis GKBD400BKFR Quick Start Manual preview
GKBD400BKFR
Brand: nedis Pages: 5

Brands by name

Popular brands

Load more brands