manualshive.com logo in svg

Roland Fantom-X6, Owner'S Manual

The Roland Fantom-X6 is a cutting-edge music workstation that offers unparalleled creative possibilities. Now, accessing its comprehensive Service Notes manual is easier than ever! Simply visit our website and DOWNLOAD this resource for FREE. Unlock the full potential of the Fantom-X6 by equipping yourself with essential technical knowledge. manualshive.com.

Share
Download
background image

 

311

MIDI Implementation

 

5. Parameter Address Map

 

*

Transmission of “#” marked address is divided to some packets. For example, ABH in
hexadecimal notation will be divided to 0AH and 0BH, and is sent/received in this order.

*

“<*>” marked address or parameters are ignored when the Fantom-X6/X7/X8 received
them.

 

1. Fantom-X6/X7/X8 (ModelID = 00H 6BH)

 

+——————————————————————————————————————————————————————————————————————————————+
| Start       |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
| 01 00 00 00 | Setup                                                          |
|—————————————+————————————————————————————————————————————————————————————————|
| 02 00 00 00 | System                                                         |
|—————————————+————————————————————————————————————————————————————————————————|
| 10 00 00 00 | Temporary Performance                                          |
| 11 00 00 00 | Temporary Patch/Rhythm (Performance Mode Part 1)               |
| 11 20 00 00 | Temporary Patch/Rhythm (Performance Mode Part 2)               |
|          :  |                                                                |
| 14 60 00 00 | Temporary Patch/Rhythm (Performance Mode Part 16)              |
| 1E 00 00 00 | Temporary Rhythm Pattern                                       |
| 1E 01 00 00 | Temporary Arpeggio (Performance Mode)                          |
| 1E 02 00 00 | Temporary Chord (Performance Mode)                             |
| 1E 03 00 00 | Temporary Rhythm Group (Performance Mode)                      |
| 1E 11 00 00 | Temporary Arpeggio (Patch Mode)                                |
| 1E 12 00 00 | Temporary Chord (Patch Mode)                                   |
| 1E 13 00 00 | Temporary Rhythm Group (Patch Mode)                            |
| 1F 00 00 00 | Temporary Patch/Rhythm (Patch Mode Part 1)                     |
| 1F 20 00 00 | Temporary Patch/Rhythm (Patch Mode Part 2)                     |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

System

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | System Common                                                  |
|    00 02 00 | System Mastering                                               |
|    00 03 00 | System External Input                                          |
|    00 40 00 | System Controller                                              |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Temporary Patch/Rhythm

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Temporary Patch                                                |
|    10 00 00 | Temporary Rhythm                                               |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Performance

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Performance Common                                             |
|    00 02 00 | Performance Common MFX1                                        |
|    00 04 00 | Performance Common Chorus                                      |
|    00 06 00 | Performance Common Reverb                                      |
|    00 08 00 | Performance Common MFX2                                        |
|    00 0A 00 | Performance Common MFX3                                        |
|    00 10 00 | Performance MIDI (Channel 1)                                   |
|    00 11 00 | Performance MIDI (Channel 2)                                   |
|          :  |                                                                |
|    00 1F 00 | Performance MIDI (Channel 16)                                  |
|    00 20 00 | Performance Part (Part 1)                                      |
|    00 21 00 | Performance Part (Part 2)                                      |
|          :  |                                                                |
|    00 2F 00 | Performance Part (Part 16)                                     |
|    00 50 00 | Performance Zone (Channel 1)                                   |
|    00 51 00 | Performance Zone (Channel 2)                                   |
|          :  |                                                                |
|    00 5F 00 | Performance Zone (Channel 16)                                  |
|    00 60 00 | Performance Controller                                         |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Patch

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Patch Common                                                   |
|    00 02 00 | Patch Common MFX                                               |
|    00 04 00 | Patch Common Chorus                                            |
|    00 06 00 | Patch Common Reverb                                            |
|    00 10 00 | Patch TMT (Tone Mix Table)                                     |
|    00 20 00 | Patch Tone (Tone 1)                                            |
|    00 22 00 | Patch Tone (Tone 2)                                            |
|    00 24 00 | Patch Tone (Tone 3)                                            |
|    00 26 00 | Patch Tone (Tone 4)                                            |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Rhythm

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Rhythm Common                                                  |
|    00 02 00 | Rhythm Common MFX                                              |
|    00 04 00 | Rhythm Common Chorus                                           |
|    00 06 00 | Rhythm Common Reverb                                           |
|    00 10 00 | Rhythm Tone (Key # 21)                                         |
|    00 12 00 | Rhythm Tone (Key # 22)                                         |
|          :  |                                                                |
|    01 3E 00 | Rhythm Tone (Key # 108)                                        |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Arpeggio

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Arpeggio Common                                                |
|    00 10 00 | Arpeggio Pattern (Note 1)                                      |
|    00 11 00 | Arpeggio Pattern (Note 2)                                      |
|          :  |                                                                |
|    00 1F 00 | Arpeggio Pattern (Note 16)                                     |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Chord

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |

|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Chord Pattern                                                  |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Rhythm Group

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|    00 00 00 | Rhythm Group                                                   |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

Setup

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|       00 00 | 0000 0aaa | Sound Mode                                 (0 - 5) |
|             |           |            PATCH, PERFORM, GM1, GM2, GS, PIANO<*>  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 01 | 0aaa aaaa | Performance Bank Select MSB (CC# 0)      (0 - 127) |
|       00 02 | 0aaa aaaa | Performance Bank Select LSB (CC# 32)     (0 - 127) |
|       00 03 | 0aaa aaaa | Performance Program Number (PC)          (0 - 127) |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 04 | 0aaa aaaa | Kbd Patch Bank Select MSB (CC# 0)        (0 - 127) |
|       00 05 | 0aaa aaaa | Kbd Patch Bank Select LSB (CC# 32)       (0 - 127) |
|       00 06 | 0aaa aaaa | Kbd Patch Program Number (PC)            (0 - 127) |
|       00 07 | 0aaa aaaa | Pad Patch Bank Select MSB (CC# 0)        (0 - 127) |
|       00 08 | 0aaa aaaa | Pad Patch Bank Select LSB (CC# 32)       (0 - 127) |
|       00 09 | 0aaa aaaa | Pad Patch Program Number (PC)            (0 - 127) |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 0A | 0000 000a | MFX1 Switch                                (0 - 1) |
|             |           |                                        BYPASS, ON  |
|       00 0B | 0000 000a | MFX2 Switch                                (0 - 1) |
|             |           |                                        BYPASS, ON  |
|       00 0C | 0000 000a | MFX3 Switch                                (0 - 1) |
|             |           |                                        BYPASS, ON  |
|       00 0D | 0000 000a | Chorus Switch                              (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 0E | 0000 000a | Reverb Switch                              (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 0F | 0000 000a | Input Effect Switch                        (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 10 | 0000 000a | Patch Mode Chorus Source                   (0 - 1) |
|             |           |                                          KBD, PAD  |
|       00 11 | 0000 000a | Patch Mode Reverb Source                   (0 - 1) |
|             |           |                                          KBD, PAD  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 12 | 0000 aaaa | Transpose Value                          (59 - 70) |
|             |           |                                           -5 - +6  |
|       00 13 | 0000 0aaa | Octave Shift                             (61 - 67) |
|             |           |                                           -3 - +3  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 14 | 0000 0aaa | D Beam Select                              (0 - 3) |
|             |           |                     OFF, PAD-TRIG, SOLO-SYN, ASGN  |
|       00 15 | 0000 00aa | Knob Select                                (0 - 3) |
|             |           |                       OFF, FLT-ENV, ARP-RHY, ASGN  |
|       00 16 | 0000 000a | (reserve) <*>                                      |
|       00 17 | 0aaa aaaa | Arp/Ptn Grid                               (0 - 8) |
|             |           |                           04_, 08_, 08L, 08H, 08t, |
|             |           |                                16_, 16L, 16H, 16t  |
|       00 18 | 0aaa aaaa | Arp/Ptn Duration                           (0 - 9) |
|             |           |                        30, 40, 50, 60, 70, 80, 90, |
|             |           |                                     100, 120, FUL  |
|       00 19 | 0000 000a | Arpeggio Switch                            (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 1A | 0aaa aaaa | Arpeggio Bank                              (0 - 1) |
|             |           |                                      USER, PRESET  |
|       00 1B | 0aaa aaaa | Arpeggio Style                           (0 - 127) |
|             |           |                                           1 - 128  |
|       00 1C | 0aaa aaaa | Arpeggio Motif                            (0 - 11) |
|             |           |                      UP/L, UP/H, UP/_, dn/L, dn/H, |
|             |           |                      dn/_, Ud/L, Ud/H, Ud/_, rn/L, |
|             |           |                                      rn/_, PHRASE  |
|       00 1D | 0000 0aaa | Arpeggio Octave Range                    (61 - 67) |
|             |           |                                           -3 - +3  |
|       00 1E | 0000 000a | Arpeggio Hold                              (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 1F | 0aaa aaaa | Arpeggio Accent Rate                     (0 - 100) |
|       00 20 | 0aaa aaaa | Arpeggio Velocity                        (0 - 127) |
|             |           |                                     REAL, 1 - 127  |
|       00 21 | 0000 000a | Rhythm Pattern Switch                      (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 22 | 0aaa aaaa | Rhythm Pattern Bank                        (0 - 1) |
|             |           |                                      USER, PRESET  |
|#      00 23 | 0000 aaaa |                                                    |
|             | 0000 bbbb | Rhythm Pattern Style                     (0 - 255) |
|             |           |                                           1 - 256  |
|       00 25 | 0000 000a | Rhythm Pattern Group Bank                  (0 - 1) |
|             |           |                                      USER, PRESET  |
|       00 26 | 0aaa aaaa | Rhythm Pattern Group Number               (0 - 31) |
|             |           |                                            1 - 32  |
|       00 27 | 0aaa aaaa | Rhythm Pattern Accent Rate               (0 - 100) |
|       00 28 | 0aaa aaaa | Rhythm Pattern Velocity                  (0 - 127) |
|             |           |                                     REAL, 1 - 127  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 29 | 0000 000a | Chord Switch                               (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 2A | 0aaa aaaa | Chord Bank                                 (0 - 1) |
|             |           |                                      USER, PRESET  |
|       00 2B | 00aa aaaa | Chord Form                                (0 - 63) |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 2C | 0000 000a | Bender and Modulation Part Select          (0 - 1) |
|             |           |                                          KBD, PAD  |
|       00 2D | 0000 000a | Beam Part Select                           (0 - 1) |
|             |           |                                          KBD, PAD  |
|       00 2E | 0000 000a | Knob Part Select                           (0 - 1) |
|             |           |                                          KBD, PAD  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 2F | 0000 000a | (reserve) <*>                                      |
|             |           |                                                    |
|       00 30 | 0aaa aaaa | (reserve) <*>                                      |
|             |           |                                                    |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 31 | 0000 000a | Rolled Chord                               (0 - 1) |
|             |           |                                           OFF, ON  |
|       00 32 | 0000 00aa | Rolled Chord Type                          (0 - 2) |
|             |           |                               UP, DOWN, ALTERNATE  |
|       00 33 | 00aa aaaa | Arpeggio Step                             (0 - 32) |
|             |           |                                      AUTO, 1 - 32  |
|—————————————+————————————————————————————————————————————————————————————————|
| 00 00 00 34 | Total Size                                                     |
+——————————————————————————————————————————————————————————————————————————————+

 

❍

 

System Common

 

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|#      00 00 | 0000 aaaa |                                                    |
|             | 0000 bbbb |                                                    |
|             | 0000 cccc |                                                    |
|             | 0000 dddd | Master Tune                            (24 - 2024) |
|             |           |                             -100.0 - 100.0 [cent]  |

Fantom-X678_r_e.book 311 ページ ２００５年５月１２日　木曜日　午後４時４０分

Summary of Contents for Fantom-X6





























































































































































































































































































































































Reviews:

No comments

Related manuals for Fantom-X6

Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
DOEPFER LMK1+ User Manual preview
LMK1+
Brand: DOEPFER Pages: 4
Energetics E-203 Instruction Manual preview
E-203
Brand: Energetics Pages: 688
Atmel 42580A User Manual preview
42580A
Brand: Atmel Pages: 18
Emprex 8193URF Install Manual preview
8193URF
Brand: Emprex Pages: 1
Roland JX-10 Owner'S Manual preview
JX-10
Brand: Roland Pages: 73
SMK-Link VP3810-TAA User Manual preview
VP3810-TAA
Brand: SMK-Link Pages: 1
Nacon CL-520 Manual preview
CL-520
Brand: Nacon Pages: 41
Fujitsu Arrows Hello AT01 Instruction Manual preview
Arrows Hello AT01
Brand: Fujitsu Pages: 28
Handy Tech Easy Braille Quick Reference Manual preview
Easy Braille
Brand: Handy Tech Pages: 4
Eminent EM3140 Manual preview
EM3140
Brand: Eminent Pages: 10
Franklin BOOKMAN MWD-440 User Manual preview
BOOKMAN MWD-440
Brand: Franklin Pages: 18
VooPoo Rimfire RTA Manual Instruction preview
Rimfire RTA
Brand: VooPoo Pages: 6
VooPoo DRAG 2 User Manual preview
DRAG 2
Brand: VooPoo Pages: 12
Trust KB-2950 User Manual preview
KB-2950
Brand: Trust Pages: 67
Trust GXT 888 Advanced Manual preview
GXT 888
Brand: Trust Pages: 78
Franklin Spanish Professor BES-1840 User Manual preview
Spanish Professor BES-1840
Brand: Franklin Pages: 33
Primus BALLISTA100T Setup Manual preview
BALLISTA100T
Brand: Primus Pages: 25

Brands by name

Popular brands

Load more brands