Roland Edirol M-16DX, Owner'S Manual

Page: 41 / 60

41
Advanced use
After you’ve mixed the sounds from each channel, you can create a well-balanced sound by making the
overall volume and loudness more consistent.
This process is called “finalizing,” and is done using a multi-band compressor and an enhancer.
The M-16DX provides six types of Finalize effects.
You can adjust the Finalize settings to create the result that’s suitable for your needs.
The Finalize function is not available if you’re using a USB connection and the M-16DX is operating at a
sampling frequency of 96 kHz.
You can choose whether to apply Finalize to the MAIN OUT jacks or to PHONES/CONTROL ROOM jacks.
➝
“Selecting the output to which Room Acoustic Control and Finalize will apply (RAC - FINALIZE)” (p. 45)
The edited settings are remembered even when the power is off.
fig.FINAL-01
1.
Press the [FINALIZE] button so it’s lit, turning the
effect on.
The Finalize screen will appear.
* If a different screen is displayed even though the [FINALIZE]
button is lit, you can press the [FINALIZE] button to access the
Finalize screen.
fig.FINAL-02
If you press the [FINALIZE] button when the Finalize screen
is already displayed, the effect will turn off and the button’s
light will go out.
Selecting an effect type
fig.FINAL-01
2.
Use the CURSOR [BWD] [FWD] buttons to move
the cursor to the effect type.
3.
Use the VALUE [-] [+] buttons to select an effect
type.
Editing the parameters
fig.FINAL03
4.
Use the CURSOR [BWD] [FWD] buttons to move
the cursor to the parameter you want to edit.
5.
Use the VALUE [-] [+] buttons to edit the value.
The value will change more rapidly if you press the [+] button while holding down the [-] button, or press the
[-] button while holding down the [+] button, allowing you to edit more efficiently.
If the [FINALIZE] button is lit, you can hold down the [DISPLAY] button and press the [FINALIZE] button to
turn off the effect at any time.
Creating a well-balanced sound (Finalize)
Editing the effect settings