Roland Edirol M-16DX Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 60

background image

15

Names of things and what they do

fig.Cpanel-3

16. MAIN MIX LEVEL Knob

Adjusts the level of the signal that is output from MAIN OUT
jacks.

17. ALT to MAIN MIX Switch

If you turn this switch on (

), the signal of the ALT bus

will also be sent to the MAIN bus.

18. FX to MAIN MIX Switch

If you turn this switch on (

), the signal from FX (echo,

reverb) will also be sent to the MAIN bus.

19. PHONES/CTRL ROOM Knob

Adjusts the volume of the signal that is output to the PHONES
jack and the CONTROL ROOM jacks.

20. ALT to PHONES/CTRL ROOM Switch

If you turn this switch on (

), the signal of the ALT bus

will be sent via the PHONES/CTRL ROOM knob and output
from the PHONES jack and CONTROL ROOM jacks.

21. FX to PHONES/CTRL ROOM Switch

If you turn this switch on (

), the signal from FX will be

sent via the PHONES/CTRL ROOM knob and output from
the PHONES jack and CONTROL ROOM jacks.

If you turn the FX to MAIN MIX switch off and this switch on,
the sound with FX (echo, reverb) applied will be output to the
PHONES jack and CONTROL ROOM jacks, and the sound
without FX applied will be output to MAIN OUT jacks. This is
convenient when you want to check the FX depth.

22. MUTE MAIN MIX Button

If you hold down this button for one second or longer so it’s
lit, the signal after passing through the MAIN MIX LEVEL
knob will no longer be output from the PHONES jack and
CONTROL ROOM jacks.

When you press the button to turn off its illumination, the
signal after passing through the MAIN MIX LEVEL knob will
once again be output from the PHONES jack and CONTROL
ROOM jacks.

23. AUX 1 MASTER Knob

Adjusts the level of the signal that is output from the AUX
SEND 1 jack.

24. PRE Switch

Selects whether the AUX SEND 1 jack will output the pre-
fader signal or the post-fader signal.

25. AUX 2 MASTER Knob

Adjusts the level of the signal that is output from the AUX
SEND 2 jack.

* The same signal that is output from the AUX SEND 2 jack is also

sent to FX (echo, reverb). This means that if you use the AUX 2
MASTER knob to adjust the output level of the AUX SEND 2
jack, the FX send level will also be adjusted to the same level.

26. FX Button

If you press this button so it’s lit, FX (echo, reverb) will be
turned on, and the signal processed by the effect will be sent
to the MAIN bus and the PHONES jack/CONTROL ROOM
jacks.

➝

“Applying echo/reverb (FX)” (p. 33)

Output section

16

17 18

22

19

20 21

23

25

26

24

On (

)

The pre-fader signal (before passing
through the channel LEVEL knob) will be
output.

Off (

)

The post-fader signal (after passing
through the channel LEVEL knob) will be
output.

«
...
13
14
15
16
17
...
»

Summary of Contents for Edirol M-16DX





























































Reviews:

No comments

Related manuals for Edirol M-16DX

Brand: Engl Pages: 24

Brand: aion Pages: 28

Equalizer LEF-317

Brand: FAME Pages: 15

Brand: Viscount Pages: 40

Brand: DeWalt Pages: 72

Brand: DeWalt Pages: 76

Brand: Sound Devices Pages: 60

Brand: T-Rex Pages: 5

Brand: PFT Pages: 48

Brand: Renfert Pages: 236

Ambiano MD 18684

Brand: Medion Pages: 17

Groovebox MC-707

Brand: Roland Pages: 121

Groovebox MC-307

Brand: Roland Pages: 216

Brand: Yamaha Pages: 12

Brand: Yamaha Pages: 10

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands