Roland Edirol M-16DX Owner'S Manual Download Page 16 | Manualshive

Page: 16 / 60

background image

16

Names of things and what they do

fig.Cpanel-4

27. Output Level Meter

Indicates the level of the signal that is output from MAIN
OUT jacks.

* If the SOLO (PRE FADER) switch is on (

), this indicates

the level of the pre-fader signal (from before passing through the
channel volume) of each channel. It’s convenient to use this when
you’re using the SENS knobs to adjust the input sensitivity.

28.
ROOM ACOUSTIC AUTO CONTROL Button

The output from the M-16DX’s MAIN OUT jacks or
CONTROL ROOM jacks can be automatically adjusted to
optimize the frequency response for your acoustical
environment.

➝

“Adjusting the output signal appropriately for your
environment (Room Acoustic Control)” (p. 35)

29. 16 BAND GRAPHIC EQ Button

You can use a 16-band graphic equalizer to adjust the output
from the M-16DX’s MAIN OUT jacks or CONTROL ROOM
jacks.

➝

“Using the 16-band graphic equalizer” (p. 40)

30. FREQ Knob

Use this to select the frequency.

31. GAIN Knob

Use this to adjust the level of the currently selected frequency.

You can also use the FREQ knob and LEVEL knob to adjust
the MID frequency and MID Q of the three-band equalizer.

➝

“Making detailed equalizer settings” (p. 29)

32. INSERT FX Button

Press this when you want to edit the Insert Effect settings.

When you press the button it will light, and the Insert Effect
screen will appear.

➝

“Using the dedicated vocal/narration effect (Insert
Effect)” (p. 30)

33. FINALIZE Button

Press this when you want to edit the Finalize settings. When
you press the button it will light, and the Finalize screen will
appear.

➝

“Creating a well-balanced sound (Finalize)” (p. 41)

34. Liquid Crystal Display

This graphically shows the input level of all channels, or
displays parameters and their values.

35. CURSOR Buttons (BWD/FWD)

Use these buttons to move the cursor when you’re editing
parameters shown in the screen. Pressing the FWD button will
move the cursor forward, and pressing the BWD button will
move the cursor backward.

The parameter or value at the cursor location is highlighted.

You can access the Utility screen by pressing the BWD button
and FWD button simultaneously.

36. VALUE Buttons (-/+)

When editing parameters shown in the screen, use these
buttons to modify the value.

If you press the [+] button while holding down the [-] button,
or press the [-] button while holding down the [+] button, the
numerical value will change more quickly, allowing you to
edit the value efficiently.

27

32

33

29

28

30

31

38

37

36

35

34

«
...
14
15
16
17
18
...
»

Summary of Contents for Edirol M-16DX





























































Reviews:

No comments

Related manuals for Edirol M-16DX

Brand: TC Electronic Pages: 27

Brand: TC Electronic Pages: 13

DITTO X2 LOOPER

Brand: TC Electronic Pages: 2

Brand: TC Electronic Pages: 2

Brand: Stone Pages: 20

Brand: Nady Audio Pages: 10

Brand: TONE WEAL Pages: 8

SUPER FUZZ SF300

Brand: Behringer Pages: 23

Brand: Mark Pages: 12

Brand: AEG Pages: 36

Brand: AEG Pages: 48

EASYCOMPACT STM5200

Brand: AEG Pages: 24

PREMIUMLINE 7 Series

Brand: AEG Pages: 24

Brand: Honeywell Pages: 9

Experion Orion Console

Brand: Honeywell Pages: 48

Brand: Panasonic Pages: 18

Brand: Panasonic Pages: 56

Brand: Taurus Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands