Roland Edirol M-16DX, Owner'S Manual

Page: 44 / 60

44
Other functions
fig.FunctionSW
You can choose one of the following two ranges.
After you change the setting of the function switch, the new
setting will actually take effect when you move the SENS
knob.
* If this is set to NARROW, you’ll be able to make detailed
adjustments.
When you turn the SENS knob, it may seem as though the
change does not occur smoothly, but this is not a malfunction.
This selects the sensor used by Room Acoustic Control.
Before you switch from EXT to INT, you must disconnect the
mic that’s connected to channel 1. If you fail to disconnect the
mic, a feedback loop may occur, possibly damaging your
speakers.
If you select EXT, channel 1 will not function as a mixer
channel.
In this case, the indication “RAC” is shown in the channel 1
position of the level meter screen.
fig.Func-CH1
If you turn the channel 1 EQ knobs or press the [SEL] button,
the following message will appear.
fig.Func-CH1-Caution
You can change various system settings in order to perform
mixing operations more conveniently and efficiently.
You can also restore the settings of the M-16DX to their
original state.
1.
Press the CURSOR [BWD] and [FWD] buttons
simultaneously.
The Utility screen will appear.
fig.UTIL-01
2.
Use the CURSOR [BWD] [FWD] buttons to
select the setting you want to change.
The value of the selected parameter will be highlighted.
fig.UTIL-02
3.
Use the VALUE [-] [+] buttons to change the
setting.
Changing the function switches
Switching the adjustment range of
the SENS knobs (SENS RANGE)
Switch Range Explanation
REGULAR
MIC 10–60 dB
Normal setting
LINE +10– -40 dBu
NARROW
MIC 40–60 dB
Optimal set-
ting for a mic
LINE -20– -40 dBu
Switching the room acoustic sensor
(RAC SOURCE)
Switch Setting
INT Use the sensor built into the M-16DX.
EXT
Use the mic connected to channel 1 as the
sensor.
Changing the system settings
(UTILITY)
Basic procedure