Roland Edirol M-16DX Owner'S Manual Download Page 9 | Manualshive

Page: 9 / 60

background image

9

Main features

The M-16DX is a 24-bit, 96 kHz full-digital 16-channel mixer.

It delivers high audio quality and sophisticated functionality at an amazing cost/benefit ratio, giving you the
sound and operability of a full-digital mixer for an ideal mixing environment.

The M-16DX has been designed as two separate units, one of which is a free-standing mix controller
(operating console). You can connect your peripheral equipment to the I/O module (connector box), and use
a single special cable to connect the I/O module with the mix controller. The I/O module can be rack
mounted.

This gives you a neat and tidy operating environment, free of tangled cables.

A full complement of input/output jacks are provided, including phone jacks and RCA pin type input/
output jacks.

For mic input, the unit offers four XLR type connectors. Phantom power is also provided.

For digital input/output, both optical and coaxial jacks/connectors are provided.

Also included are special “insert effects,” designed to be used on vocal sources input via microphone, such as
narrations and announcements; a “finalize” effect, which improves the overall volume and loudness balance
to create your final sound; and “FX,” which provides spatial-type effects, such as echo and reverb to simulate
the acoustics of a club or hall.

The M-16DX’s “Room Acoustic Auto Control” function analyzes the acoustical characteristics of the room and
automatically adjusts the output signal so that it will be appropriate for that room.

A backlit graphic LCD display is provided, letting you adjust the channel levels while viewing the settings in
the display. The display also shows information about each channel and about the effect settings, giving you
visual confirmation of the current status while you operate the mixer.

The M-16DX can be readily integrated with your computer. A total of eighteen channels—sixteen input
channels plus the main output—can be recorded simultaneously on your computer.

This capability takes the M-16DX beyond the realm of a simple mixer, letting you mix and record on your
computer-based system.

Mix controller and I/O module

A rich array of input/output jacks

Use dedicated effects to create the perfect sound

Automatic compensation for room acoustics

Graphic display

Built-in USB 2.0 audio interface

«
...
7
8
9
10
11
...
»

Summary of Contents for Edirol M-16DX





























































Reviews:

No comments

Related manuals for Edirol M-16DX

Brand: Ibanez Pages: 11

Brand: Farm Aid Pages: 21

Brand: TC Electronic Pages: 12

Studer Micro Series

Brand: Harman Pages: 111

Brand: Wohler Pages: 54

Brand: Maestro Pages: 38

Brand: Red Stamp Pages: 4

Brand: TH Custom Effects Pages: 8

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 4

Brand: Electrolux Pages: 3

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 30

Brand: Philips Pages: 29

Brand: Philips Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands