23
User's
Reference
+X
+Z
120
mm
120
mm
100
mm
(4-11/16")
(4-11/16")
(3-7/8")
+Y
Cutting Area
The maximum cutting area of the PNC-300 is 120 mm 100 mm 120 mm (4-11/16" 3-7/8" 4-11/16"). When converted to
coordinate values, this corresponds to (x, y, z) = (12000, 10000, 12000) when the coordinate unit is 0.01 mm, or (x, y, z) = (4800, 4000,
12000) when the coordinate unit is 0.025 mm. Changing the coordinate unit causes only the coordinate units for the X and Y axes to
change. The coordinate unit along the Z axis is always 0.01 mm/step.
The actual available cutting area is subject to restrictions according to the length of the attached tool, the X table position at which the
workpiece is fixed, and the vice height (in the case that the vice is used); and in some cases it may be larger than the maximum operat-
ing area.