Roland Camm-1Pro GX-300, User Manual

Page: 89 / 102

87
5
Main Specifications
List of Functions
Control-key Functions
This describes the functions of the control keys when pressed.
Key Function Range Default
MEMORY This calls up user-set cutting conditions matched to the
USER1 to 8 – tool and material in use.
USER1 to 8 −
FORCE This sets the force for the blade during cutting. 20 to 350
gf 50 gf Perform a cutting test and set the conditions to
match (10 gf step) the loaded material and the installed
blade.
20 to 350gf
(10gf step)
50 gf
SPEED This sets the speed for the blade during cutting. 1 to 85
cm/s 20 cm/s Perform a cutting test and set the condi-
tions to match (1 cm/s step) the loaded material and the
installed blade.
1 to 85 cm/s
(1 cm/s step)
20 cm/s
CURSOR
( )
( )
( )
( )
These move the material and the carriage. When a menu
is displayed, these change the menu items and setting
values.
− −
PAUSE This pauses cutting. The PAUSE LED lights up while opera-
tion is paused. Pressing this a second time cancels the
paused state. Holding down for 0.5 seconds or
longer while paused quits cutting. This key is also effective
when performing material feed using the [AREA] menu.
− −
MENU Pressing this repeatedly switches sequentially among the
presently set cutting conditions, the menu mode, and the
width-display screen. Pressing this key when in the Menu
mode returns you to the cutting conditions screen.
− −
ENTER This enables, runs, or stores the item shown on the display. − −
ORIGIN Holding down this key for 0.5 seconds or longer sets
the origin point at the present blade position (the blade
center).
− −
SHEET CUT Holding down this key for 0.5 seconds or longer cuts off
the material at the present position of the separating
knife. Press this to sever an already-cut piece of material
from a roll of material. Severing cannot be performed
while cutting is in progress.
− −
TEST Holding down this key for 0.5 seconds or longer performs
a cutting test at the present blade position. For more
information, refer to the page “Adjusting the Blade Force
and Cutting Speed.”
− −
MENU +
Power on
(LANG.)
This sets the language for messages on the display. /ENG-
LISH/ ENGLISH (LANG.) You can select from among seven
languages: EUT/FRANC/ESPAN Japanese, English, German,
French, Spanish, Italian, ITAL/PORTOG and Portuguese.
/ENGLISH/
DEUT/FRANC/ESPAN/
ITAL/PORTOG
ENGLISH
Power on
(SELECT
SHEET)
This selects the type of material to use and enables the
ROLL/PIECE/ (SELECT SHEET) setup state. For more infor-
mation, refer to the page “Details of F-EDGE/R-EDGE the
Origin-point Location and Cutting Area.”
ROLL / PIECE / F-
EDGE / R-EDGE
−