Roland Camm-1Pro GX-300, User Manual

Page: 64 / 102

62
3
Part of Practice
The Memory Feature
About the Memory Feature
When using the memory feature, 8 types of cutting conditions can be set and stored in accordance with the
tools and the material.
The stored settings can be called up easily by pressing
.
To Store in Memory
Procedure

Use the display menu to make the settings for cutting conditions matched to the tool
and material in use.
You can set the following five types of parameters.

Blade force:

Offset: Menu mode [OFFSET]

Cutting speed:

Cutting quality: Menu mode [QUALITY]

Up speed: Menu mode [UP SPEED]

Press several times until the screen shown in the
figure appears.
Press .

Press .
Press .
Press .

Press to select the user number for the condi-
tions you want to store in memory.
Press to enable the setting.

Press to go back to the screen shown in the figure.
When you store to a user number, any cutting conditions already stored to the number are automatically up-
dated (overwritten) with the newly set parameters. If you want to keep the previous cutting conditions, store
them to a different number. You can store up to eight types of cutting conditions using the steps described
above.