Roland AT800 Music Atelier Owner'S Manual Download

Page: 80 / 292

Selecting and Playing Sounds

You can have Lower voice continue to sound after you release you fingers
from the keys, until the next key is played.

fig.02-14_AT-900.eps

Press the Lower Voice [Hold] button (confirm that the
indicator is lit).

The Lower voice will continue sounding.

While the Lower Voice [Hold] button is lit, pressing a key will cause the note
to continue sounding.

When you press the Lower Voice [Hold] button to make the
indicator go dark, the notes which had continued to sound
will stop.

Sustaining Notes in the Lower Part (Lower Voice Hold)

AT-800_e.book 80 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands