Roland AT800 Music Atelier Owner'S Manual Download

Page: 206 / 292

206

Creating Original Accompaniment Rhythms

You can change an instrument used in a Rhythm and replace it
with another instrument.

Bring up the Rhythm Customize screen (p. 199).

Touch the section in the Rhythm Customize screen
where the instrument names are displayed.

fig.RC-10.eps

The Instrument Edit screen appears.

fig.RC-20.eps

Changing the Instrument Used

Touch <

> <

> in the screen to select the

name of the instrument you want to change.

Touch <Change>.

The following screen appears.

Touch <

> <

> to switch the screen, then

touch the instrument name.

The following screen appears.

To cancel operation, touch <Cancel>.

If you want to change the instrument, touch
<OK>.

The instrument is changed.

Deleting an Instrument

You can delete an instrument used in a Rhythm. When an
instrument is deleted, all of the sounds using that instrument
are deleted from the Rhythm.

Touch <

> <

> in the screen to select the

name of the instrument you want to delete.

Touch <Delete> on the Instrument Edit screen.

fig.DelInstrumentOK?.eps

To cancel operation, touch <Cancel>.

If you are sure that you wish to delete the
instrument, touch <OK>.

The selected instrument is deleted.

Changing and Deleting the Instruments Used

You can open Instrument Edit screen using the
following procedure.

Touch <

> (Utility).

The Utility screen appears.

fig.RC-11.eps

Touch <Inst Edit> (Instrument Edit).

The Instrument Edit screen appears.

AT-800_e.book 206 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands