Roland AT800 Music Atelier Owner'S Manual Download

Page: 240 / 292

240

Various Other Settings

Touch the Slide Show Type setting.

Touch <

> <

> to change the setting.

Touch <Exit>.

You can specify the interval at which images will change
when you play back a slide show (p. 260).

Touch <System> on the Main screen.

The System screen appears.

Touch <Utility>.

fig.00-38.eps

Touch <VIMA TUNES>.

The VIMA TUNES screen appears.

Touch <Options>.

The Video Option screen appears.

Setting

Description

SIMPLE

One photo will simply fade-out
while the next photo fades-in.

BLOCK

The photo will be divided into
blocks that change separately.

POP

The photo will switch using rapid
movement and color combination.

MIX

Simple, block, and pop types will
be combined.

Selecting the Interval at which Images
will Change

AT-800_e.book 240 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands