Roland AT800 Music Atelier Owner'S Manual Download

Page: 60 / 292

Selecting and Playing Sounds

Adjusting the Volume of the Flute

Vintage Organ

If you’ve selected

“

Flute

”

as the vintage organ type, you can

adjust the overall volume of the Flute sound to regulate the
volume balance relative to the other sounds.

If you’ve selected

“

Pipe

”

“

Theater,

”

the volume of the

upper/lower/pedal organ part will change at the same
time.

Touch <Sound/KBD> on the Main screen.

fig.05-08.eps

The Sound/Keyboard screen appears.

fig.VoiceList.eps

Touch <Effect>.

The Effect screen appears.

fig.05-17.eps

Touch <

> <

> to display the VintageFlute

Volume.

fig.05-12-2.eps

Touch the value setting buttons for
VintageFlute Volume to adjust the setting.

fig.05-12-2.eps

Touch <

> <

> to edit the value.

Touch <Exit>.

Setting

1–12

AT-800_e.book 60 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands