267
Troubleshooting
Troubleshooting
Appendices
Noise is heard in the sound
If there is a cell phone nearby, you
may hear noise from the ATELIER when
an incoming call or outgoing call
occurs, or during a conversation.
Keep the phone as far away as possible,
or turn off its power.
- - -
Pitch is off
Transpose is in effect.
Simultaneously press the Transpose [-] [+]
buttons to cancel the transposition (the
Transpose [-][+] buttons’ indicators will
go out).
The tuning is incorrect.
Adjust the standard pitch.
While set for an octave shift, you are
playing keys beyond the
recommended range. This does not
indicate a malfunction.
Adjust the Octave Shift setting.
Pressing the expression pedal
while playing back ATELIER
performance data produces a
crackling noise
The expression pedal function is set to
“PEDAL+COMPOSER” during
playback of ATELIER performance
data.
When this setting is used, moving the
expression pedal while playing back
ATELIER performance data may create
a difference between the expression
pedal information in the performance
data and the volume as set with the
expression pedal, which can result in
this kind of sound being produced.
Set the expression pedal function to
“PEDAL” during playback.
Rotary effect is not be applied
Some sounds do not allow the rotary
effect to be applied.
This is not a malfunction.
- - -
Some keys (of certain keyboard
parts) sound strange
You are playing notes outside the
recommended range of the voice.
This is not a malfunction.
- - -
Sound is distorted/cracked
The Part Balance volume of each part
is too high.
Press the Part Balance button to lower the
volume.
The Reverb volume has been raised
when the volume of each Part Balance
button is already raised.
Either lower the Reverb volume, or adjust
the Part Balance of each part.
The [Master Volume] slider has been
used to raise the overall volume
excessively.
Use the [Master Volume] slider to lower
the overall volume.
Sound is produced when you take
your finger off a key
You have selected a “Marimba Treml”
or “Banjo Treml” sound.
This is not a malfunction.
If you select a “Marimba Treml” or
“Banjo Treml” sound, a sound will also be
produced when you take your finger off
the key.
- - -
The Bass Range Sounds Odd, or
There Is a Vibrating Resonance
When listening through speakers:
Playing at loud volumes may cause
instruments near the ATELIER to
resonate. Resonance can also occur
with fluorescent light tubes, glass
doors, and other objects. In particular,
this problem occurs more easily when
the bass component is increased, and
when the sound is played at higher
volumes.
Use the following measures to suppress
such resonance.
•Place speakers so they are 10-15 cm
from walls and other surfaces.
•Reduce the volume.
•Move the speakers away from any
resonating objects.
- - -
When listening through headphones:
Here, a different cause (such as
resonance produced by the ATELIER)
would be suspect.
Consult your Roland dealer or nearest
Roland Service Center.
- - -
Problem
Check
Solution
Page
AT-800_e.book 267 ページ ２００８年１０月１５日 水曜日 午前９時３７分
