Roland AT800 Music Atelier Owner'S Manual Download

Page: 148 / 292

148

Applying Various Effects to the Sound

The sustain length can be set independently (SHORT, MIDDLE
(Medium) or LONG) for the Upper and Lower keyboards and
Pedalboard.

Touch <Sound/KBD> on the Main screen.

fig.05-08.eps

The Sound/Keyboard screen appears.

fig.VoiceList.eps

Touch either <Upper>, <Lower>, or <Pedal>.

Touch <

> <

> to display the Sustain

Length.

fig.05-14.eps

You can open the Pedalboard screen, Lower Keyboard
screen, or Upper Keyboard screen with touching <Pedal>,
<Lower>, and <Upper>.

For the part whose sustain length you wish to
adjust, touch the Sustain “SHORT/MIDDLE/
LONG” display.

fig.05-14-2.eps

Touch <

> <

> to change the value.

Touch <Exit>.

Changing the Sustain Length

Menu

Part whose sustain length you wish to

change

Upper

Upper part

Lower

Lower part

Pedal

Pedal part

Setting

SHORT, MIDDLE, LONG

AT-800_e.book 148 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands