Roland Aproll MDX-540, User Manual

Page: 85 / 120

83
5-3 Starting and Stopping Spindle Rotation
Starting or Stopping the Spindle
You can start and stop rotation of the spindle, and specify the speed of rotation. This operation cannot be performed while
the spindle cover is open or cutting is in progress.
For related items,

P. 52 "3-5 Starting and Stopping Spindle Rotation"
WARNING This procedure makes the machine operate. Before you perform this procedure,
check to make sure that operation of the machine will not create any hazard or
danger.
USER(RML1)
X
Y
Z
RATE x500
0.000
0.000
0.000
*READY
>S 3000
[ ]
100%-XYZ
100%-S
When the symbol is displayed, you can specify the speed of rota-
tion.
Press: This enables you to specify the speed.
Press and hold: This switches between starting and stopping the
spindle.
When the "S" symbol is displayed and the spindle is rotating, turning
the hand wheel varies the spindle speed. Note, however, that this
cannot be performed while operation is paused.
Chapter 5 Handy Panel