Roland Aproll MDX-540 User Manual Download Page 3

Page: 3 / 120

For the USA

FEDERAL COMMUNICATIONS COMMISSION RADIO

FREQUENCY INTERFERENCE STATEMENT

NOTE:

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment gen-

erates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interfer-

ence to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

For Canada

NOTICE

This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe A respecte toutes les exigences du Règle-

ment sur le matériel brouilleur du Canada.

NOTICE

Grounding Instructions

In the event of a malfunction or breakdown, grounding provides a path of

least resistance for electric current to reduce the risk of electric shock. This

tool is equipped with an electric cord having an equipment-grounding conduc-

tor and a grounding plug. The plug must be plugged into a matching outlet

that is properly installed and grounded in accordance with all local codes and

ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper

outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk

of electric shock. The conductor with insulation having an outer surface that is

green with or without yellow stripes is the equipment-grounding conductor. If

repair or replacement of the electric cord or plug is necessary, do not connect

the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding in

structions are not completely understood, or if in doubt as to whether the tool

is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole

receptacles that accept the tool’s plug.
Repair or replace damaged or worn cord immediately.

WARNING

This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.

For EU Countries

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The importer in the EU:

Roland DG Europe Holdings B.V.

Prof. J.H. Bavincklaan 2, 1183 AT, Amstelveen, The Netherlands

For California

WARNING

This product can expose you to chemicals including lead,

which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

Unauthorized changes or modification to this system can void the users author

ity to operate this equipment.

Use only I/O cables that have been designed and manufactured specifically for

this device.

Operating Instructions

KEEP GUARDS IN PLACE and in working order.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking

to see that keys and adjusting wrenches are removed from tool before turning

it on.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tools in

damp or wet locations, or expose them to rain. Keep work area well lighted.
KEEP CHILDREN AWAY. All visitors should be kept safe distance from work

area.
MAKE WORKSHOP KID PROOF with padlocks, master switches, or by re-

moving starker keys.
DON'T FORCE TOOL. It will do the job better and safer at the rate for which

it was designed.
USE RIGHT TOOL. Don't force tool or attachment to do a job for which it

was not designed.
USE PROPER EXTENSION CORD. Make sure your extension cord is in

good condition. When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. An undersized cord will

cause a drop in line voltage resulting in loss of power and overheating.
WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties,

rings, bracelets, or other jewelry which may get caught in moving parts. Non-

slip footwear is recommended. Wear protective hair covering to contain long

hair.
USE SAFETY GLASSES, face or dust mask if cutting or cleaning operation

is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT

safety glasses.
SECURE WORK. Use clamps or a vise to hold work when practical.
DON'T OVERREACH. Keep proper footing and balance at all times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and

safest performance. Follow instructions for lubricating and changing accesso-

ries.
DISCONNECT TOOLS before servicing; when changing accessories, such as

blades, bits, cutters, and the like.
REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch

is in off position before plugging in.
USE RECOMMENDED ACCESSORIES. Consult the owner's manual for

recommended accessories. The use of improper accessories may cause risk of

injury to persons.
NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or

if the cutting tool is unintentionally contacted.
CHECK DAMAGED PARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked to determine that it will oper-

ate properly and perform its intended function - check for alignment of mov-

ing parts, binding of moving parts, breakage of parts, mounting, and any other

conditions that may affect its operation. A guard or other part that is damaged

should be properly repaired or replaced.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.